空调设备洗涤室的完善程度,在很大程度上取决于喷雾器的特性。有关文献中介绍的研究结果表明,在洗涤室中采用全水苗喷嘴(图1)作喷雾器基本上是合理的。现在,对具有具体几何尺寸的喷嘴(d_c=4毫米、d_6=4毫米),得到了全水苗喷嘴的流量特性曲线和由于喷雾而形成的水滴分散性的综合特性。在一般情况下,喷雾时水的流量取决于喷嘴前水压、喷嘴孔直径和喷嘴顶盖孔直径,以及喷嘴的几何特性。经过试验研究得到了流量与上述因素之间的如下经验 The sophistication of the air-conditioning scrubber depends to a large extent on the characteristics of the sprayer. The findings presented in the literature show that it is basically reasonable to use a full water spout (Figure 1) as a spray in a scrubbing chamber. Now, with a specific geometry of the nozzle (d_c = 4 mm, d_6 = 4 mm), the flow characteristics of a full watering nozzle and the resultant dispersion of water droplets resulting from the spray are obtained. In general, the flow of water when sprayed is dependent on the pre-nozzle water pressure, nozzle hole diameter and nozzle cap hole diameter, as well as the geometry of the nozzle. After the pilot study has been the flow between the above factors and the following experience