【摘 要】
：
Al-8.5Fe-1.3V-1.7Si alloy was prepared by spray deposition and hot extrusion. The high temperature plastic deformation behavior of the spray deposited Al-8.5Fe-
【机 构】
：
School of Materials Science and Engineering
论文部分内容阅读
Al-8.5Fe-1.3V-1.7Si alloy was prepared by spray deposition and hot extrusion. The high temperature plastic deformation behavior of the spray deposited Al-8.5Fe-1.3V-1.7Si alloy was investigated in the strain rate range of 2.77×10-4-2.77×10-2 s-1 and temperature range of 350-550 ℃ by Gleebe-1500 thermomechanical simulator. The mechanism of the high temperature plastic deformation of the alloys was studied by TEM associated with the analysis of Rosler-Artz physical constitutive relationship based on the model of dislocation detaching from dispersion particles. The results show that Al-Fe-V-Si alloy has low strain hardening coefficient, and even exhibits work softening. Stress exponent n and activation energy Q were calculated based on Zener-Hollomon relation and Rosler-Artz physical model respectively. The Rosler-Artz physical model can give a good prediction for the abnormal behavior of high temperature deformation of spray deposited Al-Fe-V-Si alloy, that is, n larger than 8 and Q higher than 142 kJ/mol.However, because of the highly refined microstructure, the high temperature deformation behavior of spray deposited Al-Fe-V-Si alloy deviates more or less from the law predicted by using Rosler-Artz physical model.
其他文献
The green sheets with Ni paste as inner electrodes were sintered at 1 320 ℃ for 1 h under a N2/H2 mixing gas at an oxygen partial pressure p(O2)=10-8-10-12 MPa
Al-Cu-Mg-Ag alloys with different Yb contents were prepared by ingot metallurgy and thermomechanical treatment. The effect of Yb addition on the precipitation a
The microstructures of shape memory powders of Cu-Al-Ni prepared from pure powders of Cu, Al and Ni using the mechanical alloying(MA) technique were studied by
On the basis of researching on requirement product configuration in mass customization, the concept of product family requirement class (PFRC) and requirement-m
《湖北农业科学》多年的编辑实践表明,科技期刊的选题策划工作、编辑方式方法更新,交流方式改进等是编辑工作的重要环节。本刊编辑工作始终以为科研和“三农”服务为宗旨,在
The corrosion behaviour of Mg-3.0Nd-0.4Zr (NK30) magnesium alloy was investigated in as-cast (F), solution treated (T4) and peak-aged (T6) conditions in 5% NaCI
The effects of plastic deformation on the evolution of microstructure and micro-hardness were studied on plates made from a cylindrical ingot of AlSi/AI aluminu
Nanostructural gold/polyaniline core/shell composite particles on conducting electrode ITO were successfully prepared via electrochemical polymerization of anil
The effect of sulfur compounds (including sulfur,sulfide,sulfite and sulfate),initial concentration of heavy metal and operating conditions on Cd emission in mu
血管内皮生长因子(vascularendothelialgrowthfactor,VEGF)是一种促血管新生因子,也具有促使血管通透性增加的作用,生长因子、炎症因子[1]、缺氧等可刺激内皮细胞、平滑肌细