论文部分内容阅读
ΟΓΜУ-60H是一种单一的液压碗形密封(图1),用于常温下、摩擦面直径为60mm的密封套。它由密封座套1、轴套2、碗形橡胶圈3、浮环4和5、收紧圈6和过渡套7组成。借助于夹紧联接件8将轴的旋转运动传给轴套2,必要时靠件8可以使轴套沿轴线移动。密封座套1和过渡套7用螺钉联接,这两个零件和其余零件一起组成了整套的密封部件,借助于轴套和夹紧联接件将该部件安装到轴上,而在泵体内通过法兰9联接。密封的旋转零件由保护罩10保护,冷却水从螺纹管接头11进入和排出。
ΟΓΜУ-60H is a single hydraulic bowl seal (Figure 1) for room temperature, friction surface diameter of 60mm gland. The utility model is composed of a sealing seat cover 1, a shaft sleeve 2, a bowl-shaped rubber ring 3, a floating ring 4 and 5, a tightening ring 6 and a transition sleeve 7. The rotational movement of the shaft is transmitted to the bushing 2 by means of a clamping coupling 8, which, if necessary, displaces the bushing along the axis. The sealing sleeve 1 and the transition sleeve 7 are screwed together, which, together with the remaining parts, form a complete sealing part, which is mounted on the shaft by means of a sleeve and a clamping coupling, Lan 9 connection. The sealed rotating part is protected by a protective cover 10, from which the cooling water enters and exits.