【摘 要】
：
How to design ultra-strong,light-weight Cu alloys is a long-term pursuit in materials community,which is technically superior and cost-effective for their promi
【机 构】
：
State Key Laboratory for Mechanical Behavior of Materials,Xi’an Jiaotong University,Xi’an,710049,Chi
论文部分内容阅读
How to design ultra-strong,light-weight Cu alloys is a long-term pursuit in materials community,which is technically superior and cost-effective for their promising energy-saving applications.In this work,we prepared Cu-Mg alloyed thin films to study light element Mg alloying effects on the microstructure,hardness and strain rate sensitivity (SRS) of nanocrystalline Cu thin films.In the studied Mg concentration-range spanning from 0 at.％ to 16.8 at.％,both the grain size and the twin spacing decrease monotonously with increasing Mg composition while Cu-2.8 at.％ Mg sample has the highest twin fraction of ～75％.A combined strengthening model was employed to quantify the Mg concentration-dependent hardness of nanotwinned (NT) Cu-Mg thin films,in which the grain/twin boundary facilitates strengthening while the solute Mg atoms induce softening.Both the constant rate of loading tests and the nanoindentation creep tests uncover that compared with pure Cu samples,the NT Cu-Mg thin films manifest much lower SRS,particularly in the creep tests,owing to the activation of dynamic strain aging effects.
其他文献
A significant size effect is found in the Al3Sc dispersoid-mediated precipitation in an Al-Mg-Si-Sc alloy.When the Al3Sc dispersoid size smaller than about 40 n
Antimony chalcogenide Sb2(S,Se)3 is attracting a lot of attention as photovoltaic absorber owing to its rewarding photoelectric properties,low toxicity,and eart
Nowadays,searching for the materials with multiple magneto-functional properties and good mechan-ical properties is vital in various fields,such as solid-state
The precipitation sequence in Al-Cu-Li alloys is sensitively dependent on the Cu/Li ratio.In the low ratio Cu/Li alloys of 1-2.5,the δ'phases usually nucleate
Shape memory alloys can recover the deformed shape due to their superelasticity or shape memory effect.In this study,a novel Cu-Al-Mn-Fe shape memory single cry
In this study,mechanical properties improvement of equiatomic CoCrFeMnNi treated with an ultrasonic nanocrystal surface modification (UNSM) was studied.The appl
Movement and growth of dendrites are common phenomena during solidification.To numerically investigate these phenomena,two-phase flow model is employed to formu
The gradient nanostructured medium entropy alloys (MEAs) exhibit a good yielding strength and great plasticity.Here,the mechanical properties,microstructure,and
In order to overcome the trade-off between the strength and electrical conductivity of aluminum alloy conductors,the new Al-Ce-Sc,Al-Ce-Y,Al-Ce-Zr and Al-Ce-Sc-
The support materials are an important part of catalysts and they are the dispersant,adhesive,and sup-port for other components.In this study,three types of thi