【摘 要】
：
Taguchi approach was applied to determine the most influential control factors which will yield better tensile strength of the joints of friction stir welded RD
【机 构】
：
Centre for Materials Joining Research CEMAJOR
论文部分内容阅读
Taguchi approach was applied to determine the most influential control factors which will yield better tensile strength of the joints of friction stir welded RDE-40 aluminium alloy. In order to evaluate the effect of process parameters such as tool rotational speed, traverse speed and axial force on tensile strength of friction stir welded RDE-40 aluminium alloy, Taguchi parametric design and optimization approach was used. Through the Taguchi parametric design approach, the optimum levels of process parameters were determined. The results indicate that the rotational speed, welding speed and axial force are the significant parameters in deciding the tensile strength of the joint. The predicted optimal value of tensile strength of friction stir welded RDE-40 aluminium alloy is 303 MPa. The results were confirmed by further experiments.
其他文献
The formation mechanism of chunky graphite has been reviewed and studied. The study consisted of a unidirectional solidification method, a small droplet method
Skutterudite CoAs3 is a potentially important thermoelectric material. Morse potential is employed here to carry out molecular dynamics simulations of nanobulk
The effect of Sn addition on the microstructures and mechanical properties of Mg-5Al-2Si alloys was investi- gated with variations of Sn contents (3 and 6 wt pc
Chemical vapor deposition growth of one-dimensional nanomaterials usually demands substrates that have been coated with a layer of catalyst film. In this study,
Construction of integrated database including casting shapes with their casting design,technical knowledge, and thermophysical properties of the casting alloys
The microstructures of Ti6A14V alloy after hydrogenation were investigated by optical microscopy (OM), X-ray diffraction (XRD) and transmission electron microsc
A new ultrasonic three-point bending fatigue test device was introduced to investigate fatigue life ranging up to 1010 cycles and associated fracture behavior o
CFRP(carbon fiber reinforced plastics)composite materials have wide applicability because of their inherent design flexibility and improved material properties.
Recently,demand for the lightweight alloy in electric/electronic housings has been greatly increased.However, among the lightweight alloys,aluminum alloy thin-w
2×(FeNi/CoZnO)/ZnO/(CoZnO/Co)×2 spin-inJection devices were prepared by sputtering and photo-lithography. In the devices, two composite magnetic layers 2×(Fe