论文部分内容阅读
铣工们知道:铣削工件的斜面,通常是转动铣床的铣头来达到。然而一般立式铣床的铣头只能在一个平面内转动角度,也就是只能在工作台横向移动方向所看到的平面内转动角度。由于工作台横向移动的距离比纵向移动的距离要小得多,所以只能铣削较短的工件。可以设想,如果铣头能够在工作台纵向移动方向所看到的平面内转动角度,那么加工较长的工件斜面或多卡活连续加工就不成问题,然而这又是一般铣床所不能办到的。由于工作的需
Milling workers know: Milling the workpiece bevel, usually milling machine milling head to achieve. However, the milling head of a general vertical milling machine can only rotate in a plane, that is, an in-plane rotation angle that can only be seen in the direction of transverse movement of the workbench. Since the table moves laterally much less than the distance it moves longitudinally, only shorter workpieces can be milled. It is conceivable that if the milling head is able to rotate in the plane as seen in the longitudinal direction of the table, machining a longer workpiece bevel or continuous machining is not a problem, but this is again not possible with typical milling machines . Due to the need of work