【摘 要】
：
The first hyperpolarizabilities ('beta') of four azobenzene derivatives are measured via hyper-Rayleigh scattering (HRS) technique at 1064 nm. These compounds show weak absorbance at 532 nm and neglectable two-photon fluorescence (TPF). Their static fir
【机 构】
：
AdvancedPhotonicsCenter,SoutheastUniversity,Nanjing210096DepartmentofChemistry,StateKeyLaboratoryofC
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
The first hyperpolarizabilities ('beta') of four azobenzene derivatives are measured via hyper-Rayleigh scattering (HRS) technique at 1064 nm. These compounds show weak absorbance at 532 nm and neglectable two-photon fluorescence (TPF). Their static first hyperpolarizabilities ('beta0') are estimated by the classical two-level model. The effects of varying the variety and number of the acceptors from chloro to nitro substituents are studied. It is concluded that the first hyperpolarizabilities will be enhanced with increasing polarity or number of the acceptors, attributed to improved transferability of their 'pi'-conjugated electron clouds.
其他文献
We report an optically addressed liquid crystal light valve, a home-made device that has solved the problem of low transmittance caused by opaque electrodes in present transmissive spatial light modulators. The operating characteristic of the light valve
In order to simultaneously measure the displacements of multiple targets, the laser self-mixing interference (SMI) measurement method based on variational mode decomposition (VMD) is proposed. The SMI signal containing the motion information of the extern
本文用光线方法分析偏振单色平面波会聚成锥形光束后入射到多层介质膜上的反射波,得到了计算反射波电场强度的近似公式.然后推导出当PM分量和SM分量偏振单色平面波经会聚系统后入射到多层介质膜上时.两反射波面径一检偏器后的干涉图光强分布公式,并把它应用于一种多层介质膜,其结果与实验完全相符.
The Er3 /Ce3 co-doped tellurite-based glasses (TeO2-Bi2O3-TiO2) modified with various WO3contents are prepared using conventional melt-quenching technique. The X-ray diffraction
Combining photoacoustic (PA) imaging with laser speckle (LS) imaging (LSI) can simultaneously determine total hemoglobin concentration (HbT), hemoglobin oxygen saturation (SO2), and blood flow rates. Thus, the co-registration of PA and LS images is import
介绍了迭代卷积重建算法的教值过程,用Turbo C 2.0开发了该算法的实用软件.通过计算机模拟运算,考查了其重建精度、重建误差与投影方向数和迭代次数的关系.结果表明,该软件对180°范围内均匀投影采样,投影数为6,迭代次数为8～10次,仍具有较好的重建精度.
从米氏散射理论出发，利用单次散射理论模型研究了船舰尾流前向散射缪勒矩阵(FSMMBSW)的分布模式，以及矩阵元与气泡数密度、气泡半径之间的关系。研究表明，气泡米氏散射缪勒矩阵元m2和m4在前向90.
对常用的4种三维(3D)打印材料进行了太赫兹光谱检测与分析。实验结果表明:4种3D打印材料在0.20~2.60 THz范围内差异明显,其中3D打印聚碳酸酯材料对太赫兹光的透过率最高;4种材料的折射率在1.45~1.65之间,光敏树脂的折射率最大,在1.62左右;4种材料的介电常数实部在2.20~2.75之间,虚部在0.05~0.35之间;从吸收谱上看,4种材料都没有吸收峰并且吸收较小。该研究为利用3D打印材料制作太赫兹器件的材料选取提供了重要的参考。
利用布设在敦煌辐射校正场的自动化观测设备,对Hyperion高光谱遥感器开展定标试验;详细描述自动化定标的原理和方法,明确定标流程;针对高光谱遥感器的特点建立参考反射率数据库,以解决通道反射率与参考反射率光谱形状不匹配的问题;在2016年10月至2017年4月期间,对Hyperion高光谱遥感器共完成4次有效的自动化定标试验,并将试验结果与Hyperion高光谱遥感器观测的表观辐亮度进行比对验证。
针对传统的局部保持投影算法(LPP)直接使用数据的原始空间信息导致选取近邻不准确,以及LPP算法投影时忽略数据类别信息的问题,提出一种基于自适应近邻局部保持投影的人脸识别方法。该方法在特征提取时利用可变的相似度、近邻信息以及数据类别信息构建目标函数,使得在投影子空间中同类样本尽量紧凑,异类样本尽量远离。通过最小化目标函数自适应优化邻接矩阵与投影矩阵,用优化后的投影矩阵对高维数据进行降维,采用降维后