Mechanical characteristics of fused cast basalt tube encased in steel pipe for protecting steel surf

来源 :中国有色金属学报(英文版) | 被引量 : 0次 | 上传用户:sunliu168
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Because of the various excellent characteristics of cast basalt materials, such as, anti-corrosion, anti-wearing, good hardness, high chemical stability, of which steel may not possess, the steel-basalt composite pipes are used in severe environments for compensating the defects of steel. The limit of bending moment with which steel-basalt composite pipe may safely endure was calculated and the limit curvature of the composite pipe in the safe range was presented. The application temperature of steel-basalt pipe was examined due to a different coefficient among basalt, mortar and mild steel.
其他文献
This was an outlook on the prediction of the infrared laser potentiality from concentration dependences of the 2F5/2 experimental decay time in Yb3+-doped solid
The electric measurements were carried out for La0.8Sr0.2CoO3 nanoceramics by using impedance spectroscopy methods. The re- sistance of sample was practically i
The flow characteristics of aluminum coated boron steel in hot press forming were investigated.Furthermore,the effects of aluminum coated layer on press forming
The structural characteristics of the trivalent chromium deposits and their interfacial behavior in the plating solution with and without polyethylene glycol mo
Electrochemical corrosion of Ti-35Nb-5Ta-7Zr alloy fabricated by arc melting and heat treatment process was studied in 0.9% NaCl at (37±1) ℃. Phase and micros
By temperature gradient method under high pressure and high temperature (HPHT), with NiMnCo alloy as the solvent metal, at diamond-stable region of about 5.4 GP
Ti-Hf binary alloys contained 10%,20%,30% and 40%(mass fraction)Hf were manufactured in the vacuum furnace system.And then,specimens were homogenized for 24 h a
TiAl3-Al coating was deposited on orthorhombic Ti2AlNb alloy substrate by cold spraying with the mixture of pure Al and Ti as the feedstock powder at a fixed mo
Polysiloxane/SiO2 hybrid coatings have been prepared on Kapton films by a sol-gel process. The erosion resistance of polysiloxane/SiO2 (20 wt pct) coating was e
The electrical properties of solder contact layers between Cu-Ni shunt metal and tube type Bi2212 superconductor that is applied in superconducting fault curren