【摘 要】
：
The axial, lateral and circumferential strains were analyzed for a rock specimen subjected to shear failure in the form of a shear band bisecting the specimen in triaxial compression. Plastic deformation of the specimen stemmed from shear strain localizat
【机 构】
：
Department of Mechanics and Engineering Sciences, Liaoning Technical University, Fuxin 123000, China
论文部分内容阅读
The axial, lateral and circumferential strains were analyzed for a rock specimen subjected to shear failure in the form of a shear band bisecting the specimen in triaxial compression. Plastic deformation of the specimen stemmed from shear strain localization initiated at the peak shear stress. Beyond the onset of strain localization, the axial, lateral and circumferential strains were decomposed into two parts, respectively. One is the elas-tic strain described by general Hooke\'s law. The other is attributable to the plastic shear slips along shear band with a certain thickness dependent on the internal length of rock.The post-peak circumferential strain-axial strain curve of longer specimen is steeper than that of shorter specimen, as is consistent with the previous experiments. In elastic stage,the circumferential strain-axial strain curve exhibits nonlinear characteristic, as is in agreement with the previous experiment since confining pressure is loaded progressively until a certain value is reached. When the confining pressure is loaded completely, the circumferential strain-axial strain curve is linear in elastic and strain-softening stages. The predicted circumferential strain-axial strain curve in elastic and strain- softening stages agrees with the previous experiment.
其他文献
Taking the Xinhe mine\'s structure, mine pressure, structural fissure, fault and fault displacement, the distance between fault and water inrush point, thickness of block,water pressure those geological factors which influenced the water inrush as the i
Based on the movement regularity of surrounding rock with road-in packing of gob-side entry retaining in fully-mechanized sub-level caving face (RPGERFCF), the me-chanical model of its surrounding rock was established and the calculating formulas of the d
Focused upon the dynamic changing regularity and tendency of overburden movement and bed separation developing during the strip mining and stoping under rail-ways were simulated by ANSYS model. The results show that movement and rheology developing of key
As a good method to solve the problem of high methane on the workface and in the goaf, drawing coal strata methane through a surface borehole is used. However, the excavation affected the overlying rock strata greatly. When the excavation face passed thro
In order to improve the thermal environment of high-temperature heading face,moisture content of supply air is reduced by dehumidification, and the relative humidity of environment air of the heading face is also decreased. First, according to the coeffic
Through discussion of the time-distance curve characteristics of the direct wave and from the front, side and rear of the reflection waves of the seismic reflection method for advanced exploration in mines, and analysis of several major interference waves
Analyzed the situations and characteristics of thin coal seam mining and its mining technologies, and introduced the mining innovation technology used by Tianchen Coal Mine of Zhaozhuang Coal Company of China. This innovation technology combined the fully
CSIRO has recently developed a real-time roof monitoring system for under-ground coal mines and successfully tried the system in gate roads at Ulan Mine. The sys-tem integrated displacement monitoring, stress monitoring and seismic monitoring in one packa
The review and numerical analysis had been conducted further understand the deformation and failure beahviour of roadway junctions, associated with the different geometrical characteristics, various depth of cover, different mechanical properties around t