The bubble deformation processes were reported when gas was injected into polymer melt flow field in another paper, the experiments showed that the deformation was severely affected by the volume of the bubble, and in turn, for the different bubbles, several different deformation processes were presented during their movement along the flow channel. In addition, we could find that the magnitude of the bubble volume was dependent upon the pressure difference of the gas injection pressure and the melt pressure. In this paper, more experimental conditions were changed to investigate the parameters relevant to the detachment of bubbles from the injection nozzle. The experimental results show that the pressure difference, the melt flow velocity as well as the melt pressure were all critical for the parameters, such as the bubble detachment time, the maximum bubble diameters and the magnitude of the bubble volume. The morphology changes of bubble were very large when the flow field was abruptly changed, and the situations were more complicated.