By analyzing the effect of cross traffic (CT) enforced on packet delay, an improved path capacity measurement method,pcapminp algorithm, was proposed. With this method, path capacity was measured by filtering probe samples based on measured minimum packet-pair delay. The measurability of minimum packet-pair delay was also analyzed by simulation. The results show that,when comparing with pathrate, ifthe CT load is light, both pcapminp and pathrate have similar accuracy; but in the case of heavy CT load, pcapminp is more accurate than Pathrate. When CT load reaches 90%, pcapminp algorithm has only 5% measurement error,which is 10% lower than that of pathrate algorithm. At any CT load levels, the probe cost of pcapminp algorithm is two magnitudes smaller than that of pathrate, and the measurement duration is one magnitude shorter than that of pathrate algorithm.