对于品种多、批量小的铸件生产来说,飞边切除这个工作被看作是实现铸造生产自动化的一个难题。东京大学工学部产业机械工学专业千千岩研究室研制出一种能自动切割任何形状铸件飞边的设备。这台设备的工作程序是:首先跟踪并记录飞边位置,然后,使切割机构按照记录切割飞边。现在,虽已有能切割任何形状铸件的飞边 For a variety of small, small batch production of castings, the removal of the work of the flash is considered to achieve a casting automation problems. Department of Industrial Engineering, University of Tokyo Chiyoda Laboratory, Department of Industrial Mechanical Engineering, has developed a device that automatically cuts the flash of any shape castings. The working procedure for this equipment is to first track and record the position of the flash and then make the cutting mechanism cut the burrs according to the record. Now, though there is a flash that can cut castings of any shape