Preparation, Microstructure and Properties of NiO-Cr_2O_3-TiO_2 Infrared Radiation Coating

来源 :材料科学技术学报(英文版) | 被引量 : 0次 | 上传用户:zwj_10061
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The spherical agglomerated particles were fabricated by spray drying with the powders of NiO, Cr_2O_3 and TiO2. Plasma spray power, which has good property of flowability, was acquired by heat treatment from the particles at 1200℃ in the reducing atmosphere. Dark and uniform coating of More than 50 μm thick was deposited on the copper sheet substrate by plasma spraying. It is found that the infrared normal total emissivity of the coating is up to 0.91 at 600℃ by infrared radiation testing. The X-ray diffraction analysis shows that the formation of (Cr_0.88Ti_0.12)_2O_3 and spinel structural NiCr_2O_4 in the coating is the main reason for high efficient infrared radiation, and the phase structure and performance of coating is favorable under the thermal cycle between room temperature and 600℃.
其他文献
To protect carbon materials from oxidation, SiC coatings were prepared on carbon/carbon(C/C) composites and graphite by chemical vapor reaction. SEM and XRD ana
Porous preforms were fabricated by cold-pressing process using powder mixture of TiC, TiO_2 and dextrin. After pyrolysis and sintering, Al melt was infiltrated
Polycrystalline La_(1-x)Na_xFeO_3 (0.0≤x≤0.3) solid solutions were synthesized by a solution combustion method using glycine as a fuel. The combustion synthes
In order to synthesize the targeting drug carrier system, magnetic chitosan-5-fluorouracil nano-particles were prepared by using 5-fluorouracil (5-Fu) as model
15% (volume fraction) SiC_p/8009Al metal matrix composites(MMCs) prepared by spray co-deposition were hot-extruded and rolled to investigate the effects of poro
X-ray diffractometry(XRD), optical microscopy(OM), scanning electron microscopy(SEM) were used to study the fatigue fracture of the T7451 Al-Zn-Mg-Cu alloy (470
Portevin-Le Chatelier (PLC) effect in a severely cold-rolled Al-Zn-Mg-Cu-Zr aluminum alloy (AA7055 type) plate before and after annealing was investigated. The
High purity titanium was prepared by thermal decomposition of titanium iodide. The feasible synthetic route and optimum decompositon temperaure were obtained by
The Al_2O_3-SiO_2(sf) (volume fraction, 20%)/Al-12.6Si metal matrix composites(MMCs) with or without rare earth Pr addition were fabricated by infiltration sque
According to the Gibbs free energy difference between liquid and crystal, a thermodynamic glass-forming ability(GFA) parameter related to characteristic tempera