论文部分内容阅读
针对某地铜渣矿中铜矿物与赤铁矿、褐铁矿、磁铁矿等关系较为亲密,常在赤铁矿、褐铁矿的裂隙中嵌布着他形的黄铜矿,黄铜矿常被孔雀石、铜蓝、斑铜矿等交代的特点,结合铜矿物和铁矿物嵌布粒度粗细分布不均匀的特点,采用浮选+中矿再磨再浮选的联合工艺,得到两种铜精矿,提高了铜的回收率.
某地铜渣矿的选别工艺试验研究
【摘 要】
：
针对某地铜渣矿中铜矿物与赤铁矿、褐铁矿、磁铁矿等关系较为亲密,常在赤铁矿、褐铁矿的裂隙中嵌布着他形的黄铜矿,黄铜矿常被孔雀石、铜蓝、斑铜矿等交代的特点,结合铜矿物和铁矿物嵌布粒度粗细分布不均匀的特点,采用浮选+中矿再磨再浮选的联合工艺,得到两种铜精矿,提高了铜的回收率.
【机 构】
：
烟台鑫海矿业研究设计有限公司,山东烟台265500
【出 处】
：
湖南有色金属
【发表日期】
：
2021年6期
其他文献
Relevant experience learning:A deep reinforcement learning method for UAV autonomous motion planning
Unmanned Aerial Vehicles (UAVs) play a vital role in military warfare.In a variety of battlefield mission scenarios,UAVs are required to safely fly to designated locations without human intervention.Therefore,finding a suitable method to solve the UAV Aut
In the aviation industry,cable bracket is one of the most common parts.The traditional assembly state inspection method of cable bracket is to manually compare by viewing 3D models.The purpose of this paper is to address the problem of inefficiency of tra
The effect of Carbon Nanotubes (CNTs) content on the wettability of AgCu-4.5Ti +x CNTs (wt％) composite filler alloys on C/C composite was investigated.The results show that the added CNTs reacted with element Ti in the filler and produced the dispersed fi
Effects of traverse speed on weld formation,microstructure and mechanical properties of ZK60 Mg allo
ZK60B (Mg-6％ Zn-0.6％ Zr) alloy joints fabricated by bobbin tool friction stir welding(BTFSW) with various traverse speeds were investigated.The sound joint fabricated by the BTFSW was possible under the appropriate welding parameters.The severe plastic de
Improvement of machining accuracy in EDCM by enhanced electrochemical reaming based on a non-metalli
Electrochemical Discharge Machining (ECDM) is potentially applicable for the fabrica-tion of film-cooling holes.However,It is extremely difficult for the holes to achieve higher precision and machining quality owing to the working liquid diminish in the l
A study of composite laminates under tension-torsion biaxial loading is presented.The focus is placed on fatigue lives of composite laminates under different tension-torsion biaxial fati-gue loading paths.A macro-meso model used to predict multiaxial fati
玲珑金矿田阜山金矿东风矿区历史悠久,矿区内构造发育,矿脉众多,矿脉关系错综复杂.通过总结东风矿区的地质条件,分析了矿区207、208、206矿脉地质特征,归纳主要矿体的空间分布、产状、品位变化规律.结合围岩及夹石地质特征,总结了矿体富集的有利部位及分布规律,为矿山找矿勘探提供了地质依据.东风矿区矿体严格受断裂构造控制,断裂构造的拐弯、交汇部位及倾角变化部位赋矿.
针对机械化采矿作业过程产生的粉尘危害来源、特点、分布、潜在危害性、发生职业病的危险程度进行分析,探索研究粉尘防护技术和措施,达到控制和减弱作业场所的粉尘危害,预防职业病发生,保护矿山职工安全与健康的目的 .
云南某氧化铅银矿原矿矿石含Pb 0.72％、Ag 227.17 g/t.经矿石性质分析可知,矿石中的铅主要以白铅矿形态赋存,银主要以自然银形态赋存,自然银整体嵌布粒度微细,部分自然银呈包裹态赋存于方解石中,不利于浮选回收.结合工艺矿物学分析及银浮选探索试验的结果,确定了浮选回收白铅矿-浮选尾矿氰化浸出回收自然银的选冶联合工艺.该工艺不仅可产出铅精矿,还大幅降低了处理成本,提高了银资源的综合利用率.推荐工艺产出铅精矿及银浸出液,其中铅精矿中铅回收率为63.01％,银回收率为21.64％;银浸出液中银回收率为
利用热原子层沉积(Atomic Layer Deposition,ALD)技术在不同深宽比GaAs衬底上进行了Al2O3/HfO2复合薄膜的沉积.通过对其表面和能谱进行分析发现,沉积温度对复合薄膜的摩尔比具有较大的影响.随着深宽比的增大,其沉积表面和沟槽内会出现残留物;随着ALD沉积温度的上升,其沉积表面和沟槽内的残留物减少,摩尔比趋向均匀.当深宽比为2.2并利用150℃的低沉积温度时,表面及底面基本无残留物.但当深宽比为4.25时,150℃沉积明显有大量残留物.只有当温度升高到300℃时,表面和沟槽里复