长期以来,我厂对偶数齿齿轮齿部硬度的测量是在测量工作台上进行的,即把齿轮的一个齿顶放在测量工作台上,用测头测量对面的齿顶硬度.这种测量方法不但效率低,而且很容易损坏测头.最近,我们采用了附图所示方法进行测量,不仅大大提高了测量效率,最重要的是从根本上消除了损坏测头的潜在因素,确保了测量质量的提高. For a long time, my factory on the even number of gear tooth hardness measurement is carried out on the measuring table, that is, a gear tooth top on the measuring table, with the probe to measure the hardness of the opposite tooth .This measure The method is not only inefficient but also very damaging to the touch probe.Recently we have used the method shown in the attached figures to measure, which not only greatly improves the measurement efficiency, but also fundamentally eliminates the potential for damage to the touch probe and ensures Measurement of quality improvement.