泵浦光对固体激光器光束质量的影响

来源 :应用激光 | 被引量 : 0次 | 上传用户:swangel
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
利用有泵浦增益时的谐振腔衍射积分方程,研究了二极管泵浦固体激光器中泵浦光对振荡光场的影响,分析了泵浦光分布和泵浦光半径对振荡光场的影响。结果表明当泵浦光分布分别为均匀分布和高斯分布及椭圆高斯分布时,最佳的泵浦分布为高斯分布;对于高斯光束泵浦,泵浦半径的变化会引起振荡光场的尺寸和形态的变化。定量分析结果表明泵浦半径在一定范围内变化时,振荡光斑半径均随泵浦光半径的增大而减小。在实际的DPL设计中需要根据对振荡光的要求进行泵浦光的优化设计。 The effect of pump light on the oscillating light field in a diode-pumped solid-state laser is studied by using the integral equation of the cavity diffraction with pump gain. The influence of the pump light distribution and the pump light radius on the oscillating light field is analyzed. The results show that the optimum pump distribution is Gaussian distribution when the pump light distribution is uniform distribution and Gaussian distribution and elliptic Gaussian distribution, respectively. For Gaussian beam pumping, the change of pump radius will cause the size and shape of the oscillating light field The change. Quantitative analysis results show that when the pump radius changes within a certain range, the radius of the oscillation spot decreases with the increase of the pump light radius. In the actual DPL design, the optimal design of the pump light needs to be performed according to the requirement of the oscillating light.
其他文献
作为太阳能光伏系统中普遍使用的一种结构材料,多晶硅一直是人们研究的焦点。为了研究不同波长激光与多晶硅材料相互作用的机理,分别采用波长为532、1 064 nm单脉冲激光辐射
利用低压水射流辅助激光加工的方法对多晶硅进行试验加工,测量了无水情况下以及不同射流速率下的盲孔体积,对比研究了不同射流速率下能量损失率的变化规律,并分析了变化的原
激光打孔过程中存在强烈热流耦合,板材的液化及孔形成规律复杂。以10 mm厚低碳钢板为研究对象,综合激光发散角、辅助气体对熔融金属去除与氧化作用,建立了激光打孔数值仿真模
以混合的Ti、V、Cr元素粉末为原料,采用CO_2激光器激光熔覆沉积Ti-20V-15Cr阻燃钛合金,并针对合金沉积层的显微组织、冶金质量以及显微硬度展开研究。结果表明,采用CO_2激光
目的:观察并比较骨关节炎氦氖激光穴位照射与普通针刺两种方法的差异性.方法:以氦氖激光穴位照射模拟针刺和普通针刺为手段,选取犊鼻穴治疗膝关节骨关节炎,开展随机、对照临