【摘 要】
:
External cooling technology is one of the key technologies to realize fast-casting-rolling process of aluminum, i.e. using compulsive cooling on the external su
【机 构】
:
School of Mechanical and Power Engineering
论文部分内容阅读
External cooling technology is one of the key technologies to realize fast-casting-rolling process of aluminum, i.e. using compulsive cooling on the external surface of rollers and aluminum plate to improve the cooling ability of system, increase casting-rolling speed, and enhance the quality of aluminum plate. Heat transfer model of casting-rolling process was proposed and the characteristics of the temperature field of roller-plate system were analyzed. The influences of external cooling surface of the plate and the roller on the temperature field of the roller and the aluminum plate and the casting-rolling speed were discussed, and the relationship between external cooling and internal cooling were also analyzed. Experiment results show that, with the increase of casting-rolling speed, the influence of cooling plate surface on increasing casting-rolling speed was gradually decreased, but that of cooling roller surface was enhanced. Different mechanisms of external cooling plate surface and roller surface for improving casting-rolling speed account for this phenomenon.
其他文献
A numerical model Alloy/M has been applied to investigate the microsegregation in Al-4.45 wt pct Cu alloy. The calculated data were compared with the experiment
The measurements of temperature dependence of the magnetic susceptibility of La1-xSrxCoO3 perovskite oxides at different Sr doping (0≤x≤0.5) and annealing tem
The feasibility of forming pollution-free and environmentally benign Ce-based rare earth conversion coatings (short for RECCs) on AZ91 magnesium alloy to enhanc
A new forming process, ceramic matrix composites thixoforming in pseudo-semi-solid state, was proposed based on powder metallurgy technology combined with the s
The vacuum-free vibration liquid phase(VLP) diffusion-bonding of SiCp/ZL101A composites was investigated. The effects of vibration on the interface structure, t
The effect of Cu on the microstructure and mechanical properties of 2519 aluminum alloy was investigated by means of tensile test, microhardness test, transmiss
YAG:Ce3+ phosphor particles were prepared using polyacrylamide gel method. The structure evolution of powders during annealing process was followed by X-ray dif
The hydrodynamic deep drawing process enables net shape or near net shape forming of complicated sheet metal parts made from difficultly forming materials, such
Although biometallic materials have been used as bone implant materials for a long time, they are still detected as foreign bodies by human immune system. Calci
The reverse microemulsion composition consisting of 37. 0% cyclohexane, 26.0% surfactant (TX-10and AEO9), 13.0% n-pentanol and 24.0% aqueous phase was investiga