【摘 要】
：
The formation and growth behavior of intermetallic compound (IMC) layers after introducing an electroless Ni-W-P metallization into the Sn-3.0Ag-0.5Cu (SAC305) solder joint during soldering and aging were investigated.The soldering was performed at 250 ℃
【机 构】
：
Key Lab for Robot & Welding Automation of Jiangxi Province, Mechanical & Electrical Engineering Scho
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The formation and growth behavior of intermetallic compound (IMC) layers after introducing an electroless Ni-W-P metallization into the Sn-3.0Ag-0.5Cu (SAC305) solder joint during soldering and aging were investigated.The soldering was performed at 250 ℃ for 10 min,followed by air cooling and aging treatment at 150 ℃ up to 15 days.The results show that the scallop-like Cu6Sn5 IMC layer and planar-like Cu3Sn formed between solder and Cu substrate during soldering and aging.The Ni3P and (Ni,Cu)3Sn4 compounds were formed between electroless Ni-W-P layer and solder,and Cu substrate was not damaged and kept a smooth interface.When the isothermal aging treatment was applied,the total thickness of IMCs which formed at the SAC305/Cu and SAC305/Ni-W-P/Cu interface increased with increasing aging time.Kirkendall voids emerged at the Cu3Sn and the Ni3P layers,but the voids emerged at the Ni3P layer in the form of crack.The amount of Kirkendall voids increased and the crack elongated with increasing aging time.The Cu6Sn5 and (Ni,Cu)3Sn4 grains grew by merging adjacent grains.In the process of growth,the growing interfacial compounds filled thefree space,and new columnar dendrite grain of (Ni,Cu)3Sn4 constantly generated during aging treatment.After 15 days aging,the Ni-W-P barrier layer was still remained,which indicated that the Ni-W-P layer can be a good barrier layer between the solder alloys and Cu substrate.
其他文献
A self-regulating humidity material with bamboo for the room was prepared. The activated carbons were prepared with the temperature rising rates of 5, 10, 15, 20 ℃/min and constant temperatures of 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, and 1500
PEO ceramic coatings including ZrO2-Al2O3-SiO2 in three phases were prepared on an Al-12.5％Si alloy in electrolyte solutions containing ZrO2 nanoparticles.The microstructures and phases of the coatings were analyzed by SEM and XRD,and the heat insulation
A novel method was presented to create composite micelles of amphiphilic copolymers and Ag nanoparticles (NPs) in a three-dimensional co-flow focusing microfluidic device (3D CFMD). Self-assembly of the copolymers was initiated by the fast mixing of water
The FeNip/PP nanocomposites were successfully prepared by the two-step blending method and the permeable layer interface with thickness of 2 to 10 nm was formed on the surface of nanopowders. The interface is composed of the lattice and molecular chain, i
To improve corrosion and wear resistances of the Zirconium(Zr) based alloys which are widely applied in nuclear reactors and chemical corrosion-resistant equipment,a new surface modification scheme was designed to deposit a Zr75Cu25 coating on Zr substrat
A novel type of microencapsulated phase change materials (microPCMs) based on 1-tetradecanol (TD) core and silver-coated poly (melamine-urea-formaldehyde) (MUF) shell was successfully synthesized by in situ polymerization method followed by silver reducti
An optimal structure design of the lattice mismatched GaInP/GaInAs/Ge solar cell with high photoelectric conversion efficiency was proposed.Two-dimensional Bi2Te3 and Sb2Te3 nanosheets were prepared by solvothermal synthesis method used as thermoelectric
(ZrMg)xY2-2xMo3O12 (x=0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1) ceramics have been synthesized to obtain less hygroscopicity and negative thermal expansion. With increasing the substitution of (ZrMg)6+ (ion radius 7.2 ×10-11 m) for Y3+ (ion
Polyaniline (PANI)/Ce(NO3)3 composite with short fiber-like shape was synthesized successfully in a poly (2-arcylamido-2-methylpropane sulfonic acid) aqueous solution.A comparison of SEM images found that short fiber-like composites can be obtained by con
A novel solid-gas reaction preparation technology was used to adjust the composition and microstructure of the composite crystal materials by changing the preparation parameters. Compared with the commonly used sol-gel method, acid base neutralization sed