以铝、掺硼金刚石为阳极,不锈钢为阴极构建三电极系统处理含藻水,考察了电流密度、通电时间、沉降时间、初始pH、极板间距对处理效果的影响。结果表明,各因素对藻的去除率的影响顺序为:电流密度>通电时间>沉降时间>初始pH>极板间距,而且电流密度2 m A·cm~(-2),通电时间为30 min,沉降时间为15 min,pH=6,极板间距取1.0 cm为实验的最优工况点。 The effects of current density, current time, settling time, initial pH and plate spacing on the treatment effect were investigated using a three-electrode system with aluminum and boron-doped diamond as anode and stainless steel as cathode. The results showed that the order of influence of various factors on the removal rate of algae was: current density> electrification time> sedimentation time> initial pH> plate spacing, and the current density was 2 m A · cm ~ (-2) , Settling time is 15 min, pH = 6, and plate spacing is 1.0 cm, which is the optimal working condition.