High-pressure homogenization (HPH) technology was applied as a pretreatment to disintegrate sewage sludge.The effects of homogenization pressure,homogenization cycle number,and total solid content on sludge disintegration were investigated.The sludge disintegration degree (DDCOD),protein concentration,and polysaccharide concentration increased with the increase of homogenization pressure and homogenization cycle number,and decreased with the increase of sludge total solid (TS) content.The maximum DDCOD of 43.94％ was achieved at 80 MPa with four homogenization cycles for a 9.58 g/L TS sludge sample.A HPH sludge disintegration model of DDcoo=kNaPb was established by multivariable linear regression to quantify the effects of homogenization parameters.The homogenization cycle exponent a and homogenization pressure exponent b were 0.4763 and 0.7324 respectively,showing that the effect of homogenization pressure (P) was more significant than that of homogenization cycle number (N).The value of the rate constant k decreased with the increase of sludge total solid content.The specific energy consumption increased with the increment of sludge disintegration efficiency.Lower specific energy consumption was required for higher total solid content sludge.