【摘 要】
：
2006～2010年,对稻田杂草稻进行了播种深度、诱发出苗和化学防除的田间试验。结果表明,在水稻移栽之前,适当增加耕翻深度和提早翻耕诱草灭草,可有效地控制其发生量;在水稻移栽
论文部分内容阅读
2006～2010年,对稻田杂草稻进行了播种深度、诱发出苗和化学防除的田间试验。结果表明,在水稻移栽之前,适当增加耕翻深度和提早翻耕诱草灭草,可有效地控制其发生量;在水稻移栽之后,及时开展药剂防除,可有效地控制其危害程度。
From 2006 to 2010, a field experiment was conducted on weedy rice in paddy soils in order to determine their depth, seedling emergence and chemical control. The results showed that before the rice transplanting, the appropriate increase of tillage depth and early tillage of grass and weed control can effectively control the amount of it. After the rice transplanting, timely control of pesticides can effectively control the harm degree.
其他文献
The well crystalline YAG:Ce3+ phosphor was synthesized by solid-state method, and the temperature dependence of excitation and emission spectra of YAG:Ce3+ phos
The isothermal oxidation behavior of TiAl based alloys at 900℃ in air with a combination of Nb (5%-10%, mole fraction) and Si (1%-5%, mole fraction) was invest
A series of SmCo/Cr/TbFeCo multilayer thin films with perpendicular anisotropy were prepared by RF- magnetron sputtering system, and the effects of Cr interlaye
In order to obtain fine-microstructure magnesium alloys with superior mechanical properties, AZ61 alloy was processed by friction stir processing (FSP) combined
In order to characterize the mechanics of jet breakup,the finite volume formulations were employed to solve the Navier-Stokes equations and continuity equation
The influence of electric current on Kirkendall diffusion in Zn/Cu couples was investigated. Under the action of different electric currents, the Zn/Cu diffusio
The La0.8Mg0.2Ni2.4Mn0.10Co0.55Al0.10 alloy was prepared by induction melting. The structural and morphological characterizations were performed by means of X-r
In this paper, a Cartesian grid method with cut cell has been developed to simulate mold filling of casting process. Cut cells at the cast-mold interface are ge
A new recovery technology is developed to recycle N, N-dimethyl formamide (DMF) in waste gas from wet type polyurethane synthetic leather industry. Given that t