Effect of Heavy Metal Pollution on Potassium Behavior in Typic Udic Ferrisol

来源 :土壤圈 | 被引量 : 0次 | 上传用户:zl6273008
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The indirect influence of heavy metal contamination of soil on nutrient availability, an important aspect of soil quality, may need to be taken into consideration when determining overall effects of heavy metals. Alaboratory experiment was performed to study the effects of combined pollution of Cu, Pb, Zn and Cd on soil K status as indicated by chemical fractions, adsorption-desorption and quantity/intensity (Q/I) relationship of K in a Typic Udic Ferrisol (generally called red soil), by employing uniform design and single factor design. Compared to the control, content of exchangeable K was decreased, but that of soluble K increased in the samples contaminated with heavy metals. Due to heavy metal pollution, potassium adsorption was reduced by 5% to 22%, whereas the desorption percentage of adsorbed K increased by 2% to 32%. The Q/I curves shifted downward, potassium buffering capacity (PBCK) decreased, and equilibrium activity ratio values (AROK) increased with increasing heavy metal pollution. These influences followed the sequences of Pb>Cu>Zn and combined pollution>single one. Displacement of K from cation exchange sites and decrease in soil CEC due to heavy metals should be responsible for the changes of soil K behaviours. The findings suggest that heavy metal pollution of soil might aggravate the degradation of soil K fertility by decreasing K adsorption and buffering capacity and increasing desorption.
其他文献
The status and activities of boron in soils were studied by the approach of electro-ultrafiltration (EUF). The samples of soils, including brown-red soil and ca
文身在唐代发展为一种社会时尚,具体表现为参与者众多,文身部位广泛,文身内容丰富精美,文身方式与工具多样,文身技艺高超且有职业文身者出现。唐代文身作为一种民俗事像,发挥
Made teas and typical tea-grown soils in Sichuan and Chongqing were collected to investigate soil nutri-ents, related soil properties and tea quality. The tea-g
阐述了3D打印基本概念、实体制造方法、国内外发展研究近况,对3D打印技术的优势与问题、选用的原材料与特点、3D打印技术与传统制造业关系进行讨论,简介3D打印技术市场占有率及
利用物理混合法制备了竹粉/共聚酰胺复合材料,并且研究了该材料的激光烧结特性;通过DSC曲线,确定粉床的预热温度,利用电镜扫描图片分析了该材料激光烧结成型特性。结果表明该材料
对在不同切削条件下木材切削加工过程木工刀具磨损的多组试验数据,采用PLSR方法,根据变量重要性指标分析和因子载荷分析,从7个变量及其组合中筛选出了5个用于建模的自变量,以刀具
以胶合板为研究对象,通过改变温度、相对湿度以及空气交换率与负荷因子之比3种环境因素,探究一种快速检测的方法,分析各环境因素对胶合板VOC释放的影响以及胶合板VOC释放规律。
以PE基木塑复合材料的动态弹性模量预测模型为研究对象,利用无损检测的方法对PE基木塑复合材料的动态弹性模量进行检测。将制备方式与实验结果分别利用回归预测模型与灰色理论
将FeSO4-THPS结合鞣法与Cr鞣法和Fe(Ⅱ)鞣法进行对比,考察了它们鞣制绵羊皮后革坯的状态,测定和评估了复鞣加脂后成革的物理力学性能及感官特征,并对坯革的耐热老化性进行了
陕北某页岩气田压裂返排液处理后的出水用于回注和配制压裂液。针对该处理系统局部结垢严重的问题,对垢样采用扫描电镜/能谱和化学法进行了微观扫描和组成分析,判定结垢物的主