抽油机在正常生产中换皮带、调整电机是一项常规性工作 ,是维护、保持正常生产的条件。目前油田生产中换皮带操作时使用电机推进器 (俗称电机顶丝 )来移动电机。由于现用电机顶丝结构设计不合理 ,并且无合适工具 ,一般用管钳作为工具 ,操作起来费时费力 ,并且危险性也较大 ,通过对顶丝加以改造 ,并设计专用工具 ,经使用效果良好 ,满足了现实生产的要求。 Pumping in the normal production for the belt, adjust the motor is a routine work, is to maintain and maintain normal production conditions. At present the production of oil for belt operation using motor thrusters (commonly known as motor top wire) to move the motor. As the current structure of the top wire motor design is not reasonable, and no suitable tools, the general use of pipe pliers as a tool, it takes time and effort to operate, and more dangerous, through the top wire to be modified, and design special tools, the use of effects Good, to meet the requirements of real production.