雷达导引头交班与弹目几何位置关系研究

来源 :北京航空航天大学学报 | 被引量 : 0次 | 上传用户:htcp6600
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
研究了雷达导引头的交班误差以及截获概率与交班时刻弹目几何位置的关系 ,提出了单个误差角的导引头天线指向角误差模型 ,它与两个误差角的导引头指向角误差模型相比可以更好地分析天线指向角误差 ,并得到使指向角误差最小的弹目几何位置 ;然后进一步得到使多普勒频率误差最小的弹目几何位置 ;给出了最终的截获概率的表达式 ,截获概率由目标处于导引头天线主波束的概率、目标回波多普勒频率落入接收机频带内的概率和目标的检测概率组成的 ;最后分析了一种典型的中末交班情况 . The relationship between the handover error of the radar seeker and the interception probability and the geometrical position of the projectile at the time of handover is studied. An error angle model of the seeker angle of the seeker with a single error angle is proposed, which is related to the error of the steering angle of the seeker Compared with the model, the error of the antenna pointing angle can be better analyzed and the projectile geometric position with the smallest error of the steering angle can be obtained. Then the projectile geometry position with the smallest error of the Doppler frequency can be obtained. Finally, The probability of the expression and the intercepting probability consists of the probability that the target is in the main beam of the seeker antenna, the probability that the target echo Doppler frequency falls into the receiver band and the detection probability of the target. Finally, a typical case of end-to-end handover .
其他文献
介绍了一种复杂曲面光整加工机械──三坐标数字化磁粒光整加工机床。该机床通过对复杂曲面的数字化测量和自动编程,得到磁极与工件保持一定间隙沿工件表面运行的加工轨迹,利用
应用Gleeble 150 0热模拟试验机测定 15%Cr白口铸铁的CCT曲线 ,研究了微量稀土对高铬白口铸铁组织转变的影响。结果表明 ,稀土能增加过冷奥氏体的稳定性 ,使CCT曲线右移 ,并
平湖油气田H3+4+56为一底水构造油藏.油藏特征研究表明,该油藏为常温、常压构造底水油藏,流体性质、储集层物性、岩石胶结均好.敏感性分析结果表明,应选择油层顶部射孔,射开
简要介绍了应用于温室大棚的多功能测控仪的软硬件结构及工作原理,重点介绍了该仪表的检定与校验的新方法.该新方法提高了仪表检定与校验的自动化、智能化程度,尤其为非线性
高坎下游泄洪常常采用水垫塘消能 ,挑跌水流可能对塘底产生巨大的冲击。如果底板止水破坏 ,冲击压力在缝隙中形成强烈的脉动压力是底板失稳破坏的重要因素。利用瞬变流理论 ,
建立了SiGeHBT基区渡越时间与基区Ge组分任意剖面分布的分析模型 ,模拟分析了它们之间的关系 ,得到了获得最小基区渡越时间的基区Ge组分剖面函数 .结果表明 ,优化的Ge组分剖
尊敬的VIP客户、合作伙伴:感谢你们一直一来对上海爱赏音威电子科技有限公司(简称爱威影音)的大力支持与合作!
提出了周期序列 2 adic复杂度的稳定性问题 ,分析了其现实意义 ,定义了k 错 2 adic复杂度并简单讨论了其性质 ,最后在周期序列 2 adic复杂度分布基础上给出了两类稳定性较
阐述了山东500 kV电网安全稳定控制系统的配置思想和技术方案.在控制思想上,该系统对500 kV电网N-2故障提供了控制手段,为防范无法预计的严重故障造成电网崩溃瓦解配备了解决
从控制算法表达式、控制系统框图和 P- h图三方面 ,证明了厚度计型和动态设定型两种压力AGC的统一性 ,为轧机厚度控制系统确定 AGC的形式提供了理论依据。 From the aspects