论文部分内容阅读
桂林-3号联合收割机是桂林-2号改进后的新机型,该机能一次完成稻麦收割、脱粒、分选等项作业,且工效高、损失少。为使广大用户用好该机,特将其调整与使用知识予以介绍。 1.调整 (1)分禾器的调整左右分禾器可以上下自由浮动。工作时,一般要求分禾器尖的高度和切割器尖的高度一致。调节拉杆锁紧螺母可实现分禾器的调整。 (2)拨禾轮高低的调整通常情况下拨禾轮转到最低位置时,应保证压板作用在切割线以上作物的2/3处。可通过上下移动支承架连接螺栓来调整,同时拨禾轮左右高度也必须一致,否则会使拨禾轮甩草。 (3)拨禾轮拨齿倾角的调整收割直立或轻微倒伏作物时,拨禾
Guilin-3 combine harvester is a new model improved after Guilin-2. The machine can finish rice harvesting, threshing, sorting and other operations at a time with high work efficiency and less loss. In order to make good use of the majority of users of the aircraft, especially the adjustment and use of knowledge to be introduced. 1. Adjustments (1) Divider adjustment Left and right divider can float up and down freely. Work, the general requirements of the height of the divider tip and the height of the cutter tip. Adjustment lever lock nut can be adjusted grater. (2) Adjusting the reel height Normally, when the reel is moved to the lowest position, it should be ensured that the pressing plate will work at 2/3 of the crop above the cutting line. Can be adjusted up and down by moving the support frame connecting bolts, while reel height must also be consistent, otherwise it will reel grasses. (3) Wheel gravitation inclination adjustment Harvesting upright or slightly lodging crops, the crop Wo