【摘 要】
：
An ultraviolet-infrared dual-color detector is proposed and realized based on the vertical integration of single-layer graphene and a 4H-SiC layer by semiconductor micro-fabrication technology. The spectral response characteristics of the detector are ana
【机 构】
：
ChangchunUniversityofScienceandTechnology,Changchun130022,China1SuzhouInstituteofNano-TechandNano-Bi
【出 处】
：
OptoelectronicsLetters
论文部分内容阅读
An ultraviolet-infrared dual-color detector is proposed and realized based on the vertical integration of single-layer graphene and a 4H-SiC layer by semiconductor micro-fabrication technology. The spectral response characteristics of the detector are analyzed. The ultraviolet response range is 208—356 nm with a responsivity larger than 0.4 mA/W and the infrared response range is 1.016—1.17 μm with a responsivity larger than 0.4 mA/W at room temperature and 5 V bias voltage. The peak responsivity of the graphene in the ultraviolet-C band at 232 nm is 0.73 mA/W and in the near infrared band at 1.148 μm is 0.64 mA/W. The peak responsivity of SiC layer in the ultraviolet-B band at 312 nm is 2.27 mA/W. Besides, the responsivity increases with the bias voltage.
其他文献
All-optical analog-to-digital conversion is a paramount issue in modern science. How to implement real-time and ultrafast quantization to optical pulses with different intensities in an all-optical domain is a central problem. Here, we report a real-time
An all-fiber acousto-optic modulator (AOM), which features a compact structure and a low-driving voltage, is experimentally demonstrated for the active mode-locking of a fiber laser. The proposed AOM is based on the short length of the cladding-etched fib
The emergence of metasurfaces provides a novel strategy to tailor the electromagnetic response of electromagnetic waves in a controlled manner by judicious design of the constitutive meta-atom. However, passive metasurfaces tend to perform a specific or l
本文给出脉冲式可调谐染料激光器的结构参数及其泵浦源的性能参数。重点介绍脉冲式染料激光器的波长覆盖范围及用光栅和法布里-珀罗标准具压缩谱线宽度等研究工作、实验结果及测试方法。简单给出染料激光器其他性能的实验数据。
A 5-bit photonic analog-to-digital conversion under a sampling rate of 10 Gs/s is experimentally demonstrated. In the experiment, the birefringence walk-off in the scheme is compensated, and 16 high-extinction ratio optical transfer functions with differe
激光诱导击穿光谱是一种基于激光的定性、定量分析化学元素的方法, 可用于分析混合室中的橡胶共混物。本文采用波长为1 064 nm、脉冲能量为100 mJ的Nd∶YAG激光诱导击穿光谱法检测橡胶共混物中锌的分散情况。实验表明, 正确混料决定了橡胶产品的质量, 较短的混合时间将会导致混料的不均匀分散; 焦距等参数设置对光谱线强度影响较大。激发标定样品可产生标定曲线。通过行扫描可分析锌在橡胶共混物中的分散情况。通过估算沿着行扫描方向的强度分布, 可检测由于混合时间较短和旋转速度不同而引起的锌均匀性变化。
研究了滤光片对非色散可见成像系统获取污染气体柱浓度的影响。分析了滤光片的中心波长与入射角度之间的关系,发现滤光片的中心波长随入射角度的增大向短波方向移动,当入射角度为40°时,滤光片的中心波长漂移17.4 nm。探讨了不同滤光片对信噪比(SNR)、线性响应及灵敏性的影响。研究结果表明,可通过延长曝光时间或叠加图片增大SNR;半峰全宽为10 nm的滤光片具有较好的灵敏性;0.9以上的线性响应系数表明
利用中国气象局南京综合观测基地的Rayleigh-Raman-Mie激光雷达,对南京北郊对流层气溶胶进行观测分析。通过软阈值滤波的小波去噪方法对波长为607 nm的Raman回波信号进行平滑,利用激光雷达Raman通道的实验数据反演对流层高空的气溶胶消光系数,结合波长为532 nm的Mie散射信号反演对流层高空气溶胶后向散射系数和激光雷达比。实验结果表明:软阈值滤波的小波去噪方法可以很好地去除噪声信号,提高反演结果的准确性;在晴空的天气条件下,南京北郊高空气溶胶消光系数的变化范围为0.03~0.07 km
分析N-Λ型原子系统的原子极化率，结果表明即使在全共振条件下，EIT 效应并不一定产生，介质对信号场的色散和吸收关系与所有场的复拉比频率有关。信号场传播方程的解析分析表明，此系统可以把一束光分成不同频率的N 束光，并且其强度和相位是可控的。暗态极化子分析表明它还可以用作1→N量子分束器，产生多体纠缠态。