论文部分内容阅读
目前微机一般都配置了硬盘驱动器,使用硬盘前首先要保证硬盘系统配置正确,才能正常工作。因此对硬盘软故障作处理前首先要检查硬盘的配置参数是否正确;第二步要排除计算机病毒的干扰,当然计算机病毒也属于软故障的范畴。目前有关病毒防治的文章颇多,这里不再赞述。一、硬盘配置参数问题硬盘的配置参数由主机板上的CMOS存储器保存,标准CMOS配置包括日期和时间、基本存储器的容量、扩展存储器容量、软盘驱动器类型、硬盘驱动器类型、初始显示方式、系统缺省操作速度及键盘等的设置。目前许多微机中还配置了“ADVANCED CMOS SET-UP”(扩展的CMOS参数设置)。如果配置参数不对,可运行ROM BIOS的配置设置程序进行修改。程序运行
At present, computers are generally configured with a hard disk drive. Before using a hard disk, it is necessary to ensure that the hard disk system is configured correctly before it can work normally. Therefore, before the hard disk soft failure to deal with the first check the hard disk configuration parameters are correct; the second step to rule out the interference of computer viruses, of course, computer viruses also belong to the category of soft fault. The current article on the prevention and treatment of many articles, no longer praise here. First, the hard disk configuration parameters Problem The hard disk configuration parameters stored by the CMOS memory on the motherboard, the standard CMOS configuration includes the date and time, the basic memory capacity, extended memory capacity, floppy drive type, hard drive type, the initial display, the system is missing Provincial operating speed and keyboard settings. At present, many computers also configure the “ADVANCED CMOS SET-UP” (extended CMOS parameter settings). If the configuration parameters wrong, you can run ROM BIOS configuration settings program to be modified. Program running