Creep prediction model for nickel-based single-crystal superalloys considering precipitation of TCP

来源 :稀有金属(英文版) | 被引量 : 0次 | 上传用户:originalmemory
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The microstructure of nickel-based single-crys-tal(SC)superalloys has a pivotal influence on their creep properties.The addition of the Re element not only enhances the long-term creep properties of nickel-based SC superalloys,but also results in the formation of a topo-logically close-packed(TCP)phase which is a harmful and brittle hard phase.Here,high-temperature creep interrup-tion tests of a nickel-based SC superalloy that contains 4.8 wt%Re were performed under various temperatures and stress conditions,and the evolution of microstructure during creep was observed by scanning electron micro-scopy(SEM).The volume fraction of the TCP phase was also extracted to explore the mechanism that controls the impacts of the TCP phase on the creep properties.According to the microstructure evolution mechanism,the influence of the TCP phase was attributed to the initial damage and critical shear stress of the material.A creep performance prediction model for nickel-based SC super-alloys considering the precipitation of the TCP phase that is based on the crystal plasticity theory and a modified creep damage model was established.The simulation curves fit well with the experimental results and the errors between prediction creep life with test results are within 5%.
其他文献
Numerous studies have addressed the advan-tages of wire arc additive manufacturing for manufacturing aluminum alloys.However,the role of Ti content in alu-minum alloys has rarely been discussed.Herein,the effect of Ti content on the microstructure and pro
Ternary materials of europium complex with 2,2,6,6-tetramethyl-3,5-heptanedione(tmhd)ligand and aqua ligand as ancillary ligands have been prepared and characterized for various optoelectronic characteristics.Reactions of hydrated complex[Eu(tmhd)3(H2O)2]
Sm3+,Eu3+co-coped Ba3Bi2(PO4)4 phosphors,as potential phosphors for white light-emitting diode applications,were synthesized through the solid-state reaction method for the first time.The crystal structure,absorption spectra,photoluminescence properties,d
Ni-rich lithium nickel-cobalt-manganese oxides(NCM)are considered the most promising cathode mate-rials for lithium-ion batteries(LIBs);however,relatively poor cycling performance is a bottleneck preventing their widespread use in energy systems.In this w
A new Fe-based amorphous-crystalline com-posite without non-metallic elements,Fe55Cr15Mo15 Ni10W5,was prepared by melt-spinning.The formation ability and structure information were investigated by X-ray diffractometer(XRD),energy-dispersive spectrom-eter(
This study investigated the morphology,struc-ture and tribological properties of the three samples pro-duced by anodic oxidation of Ti10V2Fe3Al in a sulfuric/phosphoric acid electrolyte(SPA),a near-neutral sodium tartrate electrolyte without nanoparticles
Three-dimensional(3D)thin-film electrodes are promising solution to the volume change of active mate-rials in lithium-ion batteries.As a conductive current col-lector,the 3D TiO2 nanotube array networks(TNAs)have a one-dimensional stable electronic conduc
Thermal barrier coatings(TBCs)consisting of La2Ce2O7(LCO)and Y2O3-stabilized-ZrO2(YSZ)double-ceramic layer and Dy/Pt co-doped NiAl bond coat were produced by electron beam physical vapor deposition(EB-PVD).Thermal cyclic performance of the TBCs was evalua
A new high-pressure die-cast(HPDC)Mg-4A1-3La-lCa-0.3Mn(ALaX431)alloy with high strength has successfully been fabricated.This HPDC alloy in peak-aged state exhibits tensile yield strength(TYS)of 220 MPa at room temperature and TYS of 145 MPa at 250℃,highe