论文部分内容阅读
By using auger electron spectroscopy(AES)and diffusion theory to analyze the surface segregation of copper in antibacterial ferritic stainless steel,establishing a diffusion model,and calculating the activation energy of diffusion of the copper in ferrite,the affect of surface segregation on the antibacterial capabilities were researched.The results show that the concentration of the copper surface at 973 K and 1 073 K could be expressed asln (X_(Cu)~s)/(X_(Cu)~b)=k_0 ((Dt)~(1/2))/d((-ΔH_r~(Cu)+ΔH_r~(iron)+ΔH_s~(Cu))/(3RT)),with the parameters relating to the concentration of the diffusion layer,the coefficient of diffusion,the length of diffusion,the latent heat of evaporation and the latent heat of fusion.The activation energy of diffusion of copper in ferrite is approximately 221.688 kJ/mol.The antibacterial property of the steel is improved as the surface segregation of the copper is increased.At 1073 K for 60 min,the concentration of the surface copper is over three times higher than the basic concentration.The antibacterial property of the stainless steel can reach approximately 99.9%.
By using auger electron spectroscopy (AES) and diffusion theory to analyze the surface segregation of copper in antibacterial ferritic stainless steel, establishing a diffusion model, and calculating the activation energy of diffusion of the copper in ferrite, the affect of surface segregation on the antibacterial capabilities were researched. The results show that the concentration of the copper surface at 973 K and 1 073 K could be expressed as ln (X_ (Cu) ~ s) / (X_ (Cu) ~ b) = k_0 ((Dt) 1/2) / d (- ΔH_r Cu + ΔH_r iron + ΔH_s Cu / 3RT), with the parameters relating to the concentration of the diffusion layer, the coefficient of diffusion , the length of diffusion, the latent heat of evaporation and the latent heat of fusion. The activation energy of diffusion of copper in ferrite is approximately 221.688 kJ / mol. The antibacterial property of the steel is improved as the surface segregation of the copper is increased. At 1073 K for 60 min, the concentration of the surface copper is over three times highe r than the basic concentration. antibacterial property of the stainless steel can reach about 99.9%.