【摘 要】
：
In this paper, a system supporting behavioral therapy for autistic children is presented. The system consists of sensors network, base station and a brooch indicating person's emotional states. The system can be used to measure values of physiological pa
【机 构】
：
DepartmentofMetrologyandOptoelectronicsFacultyofElectronics,TelecommunicationsandInformaticsGdanskUn
【出 处】
：
JournalofInnovativeOpticalHealthSciences
论文部分内容阅读
In this paper, a system supporting behavioral therapy for autistic children is presented. The system consists of sensors network, base station and a brooch indicating person's emotional states. The system can be used to measure values of physiological parameters that are associated with changes in the emotional state. In the future, it can be useful to inform the autistic child and the therapist about the emotional state of the interlocutor objectively, on the basis of performed measurements. The selected physiological parameters were chosen during the experiment which was designed and conducted by authors. In this experiment, a group of volunteers under controlled conditions was exposed to a stressful situation caused by the picture or sound. For each of the volunteers, a set of physiological parameters, was recorded, including: skin conductance, heart rate, peripheral temperature, respiration rate and electromyography. The bio-statistical analysis allowed us to discern the proper physiological parameters that are most associated to changes due to emotional state of a patient, such as: skin conductance, temperatures and respiration rate. This allowed us to design electronic sensors network for supporting behavioral therapy for children with autism.
其他文献
为了验证高精度传感器量测下某种扩展目标跟踪算法的有效性,往往需要与其它算法进行对比,并评估其估计性能。与传统的点目标不同,扩展目标跟踪的主要任务不仅仅是要估计出目标的运动状态,更重要的是要对其扩展形态进行精确估计。因此,对扩展目标的形态估计性能评估有着迫切的需求。针对基于星凸形和支撑函数这两种具有代表性的扩展目标模型,考虑到其所具有的不同的形态参数描述方式,提出了一种具有不同数学形式的改进豪斯多夫
激光微冲击成形(μLPF)是利用脉冲激光产生的等离子体爆轰波的冲击力效应使超薄板材产生塑性变形的新技术。通过自主开发的有限元网格划分程序MicroMesh,实现了规则晶粒、晶界以及不规则晶粒、晶界的网格划分,并利用动态显式有限元方法(FEM),对超薄板材脉冲激光微冲击成形过程进行了晶粒级的数值模拟。较之一般的连续介质有限元方法,考虑晶粒和晶界的有限元法能够更好地反映板材的微观组织与性能。研究结果表明,该方法可以有效地模拟激光微冲击成形中板材的变形过程。
We obtain high peak power pulses in megawatt range of the first (1181 nm), second (1321 nm), and third order (1500 nm) Stokes radiation from self-conversion of the 1067-nm laser radiation based on Nd:KGW laser. The maximum output energy of the first order
从最近H. 雅可布斯,H. A. 包登, L. 哈特金, V. N. 史密列发表的论文看,从史氏文章中, 用充满激活介质的法布里-珀洛结构研究了光激射器的特性。对于为三种介 质-空气, 红宝石, 空气组成放大器之电场增益, 用史氏方程表示。
根据某型加固显示器的应用环境及内部功能模块的热特性，选择强迫风冷的散热方式，并通过热仿真计算指导风扇选型，根据仿真结果验证散热方案的可行性。最终，依据试验结果验证仿真结果的准确性，为加固显示器的热设计提供思路。
在透镜研磨加工中，光学检查占有相当大的比重，虽然以前几乎所有部门的光学检查，向来都用白炽灯及放电管作为光源，然而在大批量生产透镜的单位，其矛盾就颇为突出；不仅测试检查工作量大，而且还需要有熟练的技术和经验。近年来，由于激光应用范围的不断扩大，在透镜研磨加工及光学检查中它已成为一种有效的检测工具。激光具有相干性良好，辉度大，价廉，寿命长且容易买到等特点；本文整理了透镜牛顿环检查和光轴测定方面的应用，今后在其它领域应用肯定还将会有进一步的发展。最近作者有效地进行了这方面的实验。在此仅就有关在透镜研磨加工中应用
提出了一种利用原子系统的关联相位涨落调控量子干涉的方法。原子之间的碰撞以及原子与外界热库的耦合会导致原子能级产生随机的相位涨落。研究了不同能级的相位涨落的强度和他们之间的关联对原子相干性和量子干涉的影响。结果表明,正关联相位涨落可以增强相消量子干涉(探针光的吸收减弱),而反关联相位涨落可以增强相长量子干涉(吸收增强)。在特定条件下量子干涉消失,原子对探针光的响应由Autler-Townes分裂决定。最后,研究了耦合光Rabi频率对量子干涉的影响。当耦合光较弱时,可以利用原子能级的关联相位涨落有效地调控量子