The mineral admixture slurry was made by wet-discharged fly-ash(WDFA)pro-moted by matrix bonding component(MBC),and the ......

In this paper, Chemical mechanical planarization (CMP) of Ge2Sb2Te5 (GST) is investigated using hard pad (IC1010) and so......

Artificial organic dyes are widely used in the various industries..Dye acid orange 7 is one of the most widely used in t......

Thermal Barrier Coating(TBC)is necessary to increase turbine inlet temperature of a high efficient gas turbine for a pow......

本文针对地铁隧道在饱和砂土和浆液中的浮力进行了模型试验,试验采用砂土和浆液两种介质,实验结果说明地下隧道在饱和砂土中的浮力......

There are many karst areas within Wuhan-Guangzhou route. Karst grouting is one of the main construction procedures of th......

In this paper, the effects of pouring temperature of magnesium melt, preheating temperature of the barrel of the screw m......

The semisolid slurry of Al-Zn-Mg-Cu alloy was prepared through a self-designed water-cooled copper serpentine pouring ch......

Optimizing operational parameters for syngas production of Texaco coal-water slurry gasifier studied in this paper is a ......

In this study, the effects of pH on slurrying properties of petroleum coke water slurry(PCWS) were investigated. The slu......

It is shown that stress fields within the earth are the principle control for hydraulic fracture direction in horizontal......

Most commercial slurries in hydrotransport pipelines usually contain some gas which can considerably degrade the pump pe......

请下载后查看，本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view......

Washing using ceramic micro-filtration membranes was studied in the preparation of nano-sized TiO2 and Al2O3 powder prec......

A hydrate shell model coupled with one-dimensional two-fluid pipe flow model was established to study the flow character......

Carbon-carbon composite (C/C) materials are prone to severe oxidation and volatilization problems. To address these issu......

In this paper, chemical mechanical planarization (CMP) of amorphous Ge2Sb2Te5 (a-GST) in acidic H2O2 slurry is investiga......

The local flow characteristics in an external-loop airlift slurry reactor were investigated.The axial profiles of the lo......

The aim of this work was to evaluate the catalytic properties of a Ru promoted Co/SBA-15 catalyst for Fischer-Tropsch sy......

A two-liquid-phase(TLP) soil slurry system was employed to quantify the efficiencies of autoclaving and mercuric chlorid......

In this article, residual oil hydroconversion was studied in slurry phase in the presence of fine solid Ni Mo/γ-Al2O3 c......

In this study, the effects of particle size distribution (PSD), chemical composition and pore structure of petroleum cok......

Pd-only three-way catalyst(TWC),Pd supported on washcoating(the mixture of alumina and Ce-Zr solid solution)/cordierite,......

A five-site comprehensive mathematical model was developed to simulate the steady-state behavior of industrial slurry po......

Magnesium bicarbonate,prepared by the carbonation of magnesium hydroxide slurry,was used as a novel saponifier to elimin......

According to the principle of grain refining and slurry preparation by cooling sloping plate process, the distributions ......

简要评述了在油气生产过程中因冲刷腐蚀而带来的各种挑战,介绍了在建立冲刷协同效应模型方面所取得的成就,并对冲刷腐蚀机理、用于......

This paper introduces a slurry suspension settlement prediction model for cohesive sediment in a still water environment......

Core–shell nanoparticles containing plasmonic metals(Ag or Au) have been frequently reported to enhance performance of ......

The mechanical behaviors of the interface between coarse-grained soil and concrete were investigated by simple shear tes......

研究NiO/Fe_2O_3湿式混合与球磨过程中的噪声能消耗、球磨效率及二者之间的关系。结果表明,球磨工艺的最佳工艺参数为:填水率64.10......

在伪 homogeneous 流动和异构的流动的水榔头被调查了，并且为波浪繁殖的方程加速并且另外的压力由于在两流动的水榔头被开发了。这......

Pipe jacking has become a popular method in drainage construction in Hong Kong.However,the variedground conditions enco......

请下载后查看，本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view......

A Si-Al-Ir oxidation resistant coating was prepared for SiC coated carbon/carbon composites by slurry dipping. The phase......

Silicide coating was prepared on electro-deposited nickel layer by the slurry pack cementation process on copper matrix ......

The electromagnetic direct chill (EMDC) casting process is a well-established production route for aluminum alloy ingot,......

The effects of surfactant on the solvent extraction in leaching sphalerite were investigated. It is found that sodium do......

利用超声振动法制备AZ91合金半固态浆料,在不同温度区间和冷却速率下对熔体进行超声处理,研究冷却条件对AZ91半固态浆料微观组织的......

The influence of active elements C and Hf on the interface reactions and wettability between a Ni_3Albased superalloy an......

Centrifugal casting was applied to produce cylindrical castings using SiCp/Al composite slurry,which contained 20%SiC pa......

TiB_2particle-reinforced 7075 Al alloy was synthesized to investigate the effect of TiB_2 particles on microstructure of......

IntroductionThe process development of copper/low-K backends is unique in the semiconductor industry. Thereare a substa......

采用蛇形通道法制备ZL101铝合金半固态浆料,研究浇注温度、弯道数量、蛇形通道温度对ZL101铝合金半固态浆料显微组织的影响。结果......

Surface planarity is of paramount importance in microelectronics. Chemical Mechanical Polishing (CMP) is the most viable......

The conception of the soft layer during chemical mechanical polishing(CMP) was proposed for the first time. The soft lay......

This paper,from three aspects including construction conditions,foundation design and construction,introduces some consi......

This paper was to investigate basic properties of micro/ nano fibrils from poplar with a high pressure homogenizer. Thei......

Copper chemical mechanical polishing (CMP) is influenced by geometric characteristics such as line width and pattern den......

In order to understand the fundamentals of the chemical mechanical polishing(CMP) material removal mechanism,the indenta......