Photocatalytic Activity under UV and Visible Light Irradiations of Europium (Ⅲ) and Niobium (Ⅴ)-Codo

来源 :2011年第三届微电子及等离子体技术国际会议 | 被引量 : 0次 | 上传用户:mzhou2009
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Europium (Ⅲ) and niobium (Ⅴ)-codoped TiO2 nanopowders have been synthesized by Ar/O2 radio frequency thermal plasma oxidizing atomized aqueous precursors with various concentrations of Eu3+/(Eu3++Nb5++Ti4+)=0–0.5 at.% and Nb5+/(Eu3++Nb5++Ti4+)=0–1.0 at.%.
其他文献
Arrays of microhole patterns are fabricated on the surfaces of diamond films through a physical mask in ECR-rf oxygen plasmas.Nanotips with high aspect ratio form in the microholes.
Tin oxide (SnO2),an n-type semiconductor with a wide band gap (Eg=3.6 eV at 300 K),is regarded as one of the most promising materials for gas sensors,heat mirrors,photovoltaic solar energy conversion
In recent years,the investigation on graphene for electron devices applications has drawn great attention.One of the promising applications of graphene is on high-speed photodetector.
The critical dimension in Si device technology has been constantly shrunk.At the same time the aspect ratio of Cu trenches or via holes increases.
For enhancing dielectric constant,either maximizing polarizibility or minimizing molar volume is needed.In this,study,the electrical and structural properties of HfO2/SrTiO3 composite gate dielectric
Frequency and reverse time effects on asymmetric bipolar pulsed DC BCl3 etching of GaAs were investigated.Gas flow rate of BCl3 was fixed at 20 sccm and chamber pressure was at 75 mTorr.
The capacitive coupled plasma (CCP) has been extensively used in the semiconductor industry because it has not only good uniformity,but also low electron temperature.
Low-k materials as SiO2 play important role in semiconductor industry and the plasma is one of the mostly used tools for advanced materials processing.
For optoelectronic applications such as display drive transistors or photovoltaic cells,controlling the microstructure of films is important in terms of enhancing the electrical and optical properties
Plasma etching is widely used for fabricating semiconductor electronic devices and microelectromechanical systems (MEMS),but plasma etching is known to cause damages due to charge-up and UV irradiatio