Recent progress on development of SIMP steel for accelerator driven system with LBE as coolant

来源 :第13届中日双边先进能源系统和聚变裂变工程材料会议(CIS-13) | 被引量 : 0次 | 上传用户:LIUSHENGWU5
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Accelerator driven system(ADS)was proposed for the treatment of spent nuclear fuel.In principal,it takes together the advantages of transmutation of spent nuclear fuel as well as the safety.However,material is one of the main bottlenecks for the development of ADS since its service behavior determines the systems feasibility,safety and economy.Lead-Bismuth Eutectic(LBE)as one choice of ADS coolant.Focused on the requirement of material working in the LBE environment,a new structural material named SIMP steel was developed and tested.It was found that SIMP steel has good performances on the resistances to intense particles irradiation,high temperature as well as LBE corrosion.In this report,recent progress on the studies of SIMP steel will be introduced.
其他文献
太阳能一体化灯是利用太阳能作为能源,将所有组成部件太阳能电池组件、储能电池、充电放电控制器、LED 灯头集于一体的新型照明装置,具体形式可以是庭院灯、路灯、草坪灯、景观灯、信号灯等。它由于日常使用不受供电影响、依据太阳光照情形自动开关、不消耗常规电能,不用开沟埋缆、安装简便、节能环保,因而应用前景广阔。
会议
Fusion energy becomes essential to solve the energy problem with the increase of energy demands.Although the recent studies of fusion energy have demonstrated the feasibility of fusion power,it common
Reduced activation ferritic/martensitic(RAFM)steels such as F82H,EUROFER,RUSFER,CLAM and CLF-1 are structural material candidates of breeding blankets in future fusion reactors.The surface of RAFM ste
As one of candidate structure materials for future fusion reactors,vanadium alloy has been widely studied in recent decades.In the present investigation,an attempt has been made to maintain mechanical
Concrete is used as the main construction material of nuclear facilities.A relatively large amount of tritium(T)can be retained in the cement portion of concrete because a majority of water in concret
Transmission electron microscopy(TEM)and Secondary Ion Mass Spectroscopy(SIMS)were used to investigate the microstructural and chemical evolution in a zirconium alloy processed by high pressure torsio
The recrystallization behaviors of pure tungsten with different rolling reductions were investigated by isothermal annealing in 1350℃.The variations of hardness and recrystallization volume fraction w
Hydrostatic extrusion(HE)is a proper process to fabricate pure tungsten,because the hydrostatic pressure can effectively improve the formability of materials.In this study,the HE process at elevated t
W offers excellent compatibility with liquid metals,high thermal conductivity,low sputtering yield,high hardness/strength are thus appealing for many important high temperature applications such as pl
Tungsten and tungsten-based alloys are important materials in lighting,electronics,military and fusion reactors due to their good thermal conductivity,high melting point,low erosion rate and low triti