• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 会议论文
  5. Processing and mechanical properties of commingledramie fiberreinforced poly(lactic acid) composites

Processing and mechanical properties of commingledramie fiberreinforced poly(lactic acid) composites

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：lovezx1990
【摘 要】
：
The ramie fiber reinforced poly(lactic acid) (RF/PLA) composites were prepared by the commingled yarns method.The effect of different manufacture parameters on the mechanical properties of the composi
【作 者】
：
LIN Anqi LI Yan 
【机 构】
：
School of Aerospace Engineering and Applied Mechanics,Tongji University,1239Siping Road,Shanghai 200
【出 处】
：
第二届中国国际复合材料科技大会 (CCCM-2)
【发表日期】
：
2015年7期
【关键词】
：
ramie fiber composite PLA commingled yams crystallization mechanical property 
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
　　The ramie fiber reinforced poly(lactic acid) (RF/PLA) composites were prepared by the commingled yarns method.The effect of different manufacture parameters on the mechanical properties of the composites were studied.After the melt-compounding, the composites manufactured at cooling rate of 2℃/min were higher than that with 4℃/min;and when the cooling rate was 2℃/rain and followed by an annealing process, the tensile properties were further enhanced.
其他文献
玻纤线植入杨木单板方式对单板层积材力学的影响
通过玻璃纤维线为底线辅助聚乙烯纤维线为面线植入杨木单板强化单板层积材力学性能，对比了植入1cm线性间隔玻璃纤维线的表面处理、网状植入和多层植入杨木单板对单板层积材(LVL)力学性能的影响.结果 表明：通过玻璃纤维硅烷偶联剂表面处理、网状植入和多层植入进一步提高了LVL的弹性模量、静曲强度和冲击韧性，与未植入增强材料的LVL力学性能相比，弹性模量提高了37.4％，静曲强度提高了40.5％，冲击韧性提
会议
杨木单板玻纤植入方式LVL力学性能
基于动态塑化的木质纤维塑性加工原理
为探索木质纤维资源高效利用的新途径,本文提出了基于动态塑化-木塑复合之木质纤维塑性加工理念,系统地研究了木质纤维的动态塑化机理,初步建立了以木质纤维的动态塑化为基础、以木塑复合为基本途径的木质纤维塑性加工的理论体系。主要研究内容包括以下几个方面：(1)通过DMA采用粉末样品夹(MP-DMA)对木材纤维的动态粘弹性进行测试,揭示了离子液体(IL)氯化1-乙基-3-甲基咪唑([Emim] Cl)对木材
会议
木质纤维材料塑性加工动态塑化热塑性变形木塑复合材料流变性能
聚双酚酸苯基磷酸酯在阻燃苎麻织物/苯并噁嗪树脂复合材料的应用
苯并噁嗪树脂具有优异的静态和动态力学性能、低的吸水率、高的热稳定性能和阻燃性能等，主要应用于汽车、航空航天和建筑工业材料[1]。天然苎麻纤维具有密度低、力学性能好以及可自然降解等特点，是绿色复合材料的理想增强材料。结合二者各自优势及协同作用，可望制备出高性能苯并噁嗪树脂复合材料。
会议
苯并噁嗪苎麻聚乙烯亚胺聚双酚酸苯基磷酸酯复合材料阻燃性能
模压成型的木塑复合材料蠕变模型研究
采用20～40目杨木纤维填充高密度聚乙烯(HDPE)基体,利用板坯铺装模压成型法制备了木塑复合材料(WPC),通过弯曲性能测试和24h蠕变-24h回复实验以及利用两参数指数模型、Findley指数模型以及四元件Burgers模型拟合24h蠕变曲线,研究结果表明,制备的WPC的弯曲强度为26.71MPa,弹性模量为2.73GPa；24h形变为1.142mm,24h回复率为71.45％；三种模型中,四
会议
木塑复合材料弯曲强度弹性模量蠕变-回复蠕变模型
新型竹塑复合工程材料界面表征与性能调控
我国孟宗竹数量约占全球90％，但加工水平却令超过60 wt％的材质沦为竹粉等剩余物。为此将孟宗竹粉(MBF)经γ-氨丙基三乙氧基硅烷(KH550)表面改性并与高密度聚乙烯(HDPE)复合后，提出了竹粉多达50-70 wt％的新型复合材料；采用衍射法(XRD)与电镜法(SEM)诠释了界面演变，借助人工智能(A工)调控了综合性能。
会议
复合材料天然纤维聚合物界面神经网络
The impact on properties of rice straw-HDPE composites withpreprocessing of ammonium polyphosphate
This paper studies the synthesis ofbio-nano-SiO2 on rice straw surface and APP by in situ polymerization, which rice straw was considered as the dispersed phase, ammonium polyphosphate (APP) was consi
会议
Effect of fiber size on the mechanical and creep properties of WPC prepared by forming mat-compressi
Four kinds of different mesh size fiber reinforced HDPE composite was prepared by forming mat-compression molding.Four kinds of reinforced fibers of different size include 80-120 mesh, 40-80 mesh, 20-
会议
wood-plastic compositecompression moldingfiber sizemechanical propertiescree
Influence of Implanting Technology of Glass Fiber into Poplar Veneer on Laminated Veneer Lumber
Glass fiber as bottom line assisted with polyethylene fiber line as facial line were implanted into poplar veneer for reinforcing mechanical properties of laminated veneer lumber(LVL), influence of im
会议
Poplar veneerGlass fiberImplanting TechnologyLVLMechanical properties
The influence effect of structural parameters ofbamboo fiber on the mechanical properties ofvascular
The stress transfer between bamboo fiber and matrix plays an important role in controlling the micro-mechanical behavior of bamboo vascular bundles.Based on the staggered alignment pattern and tapered
会议
Vascular bundleBamboo fiberComposite materialMechanical model
Principles of plastic processing of lignocellulosic fibers using in-situ/dynamic plasticization
This study explores a new approach to effectively utilize lignocellulosic resources based on in-situ/dynamic plasticization.First, we analyzed mechanism of in-situ/dynamic plasticization of LM and the
会议
Lignocellulosic MaterialsPlastic ProcessingIn-situ/Dynamic PlasticizationTher