论文部分内容阅读
Preparation of Ceramic Foams Suitable for Aircraft Arresting by the Airport Runway Based on a Protei
【机 构】
：
College of Materials Science and Engineering, Sichuan University, Chengdu 610064, China
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2014年5期
其他文献
Evaluation of Microstructure and Wear Properties of Ti-6Al-4V Alloy Plasma Carbonized at Different T
Ti-6Al-4V (TC4) alloys were plasma carbonized at different temperatures (900, 950, and 1 000?) for duration of 3 h. Graphite rod was employed as carbon supplier to avoid the hydrogen brittleness which is ubiquitous in traditional gas carbonizing process.
In order to increase the content of rare-earth oxides in magneto-optical glass and improve the Verdet constant, the rare-earth doped ternary Ga2O3-B2O3-SiO2(GBS) system magneto-optical glasses were prepared by the melt quenching technique. The influence o
In order to investigate the high-temperature performances of the asphalt pavement hot-applied sealant, as well as to reduce failures of the sealant pullout, the softening point test and the flow test (two existing methods for evaluating high-temperature p
Bio-ceramsite technology is one of the most effective technologies in the pretreatment of drinking water. In this work, bio-ceramsite was fabricated byCitrobacter freundii (C. freundii) immobilization on the ceramsite. Thefi ndings of the current study su
In order to investigate the carbide dissolution mechanism of high carbon-chromium bearing steel during the intercritical austenitization, the database of TCFE7 of Thermo-calc and MOBFE of DICTRA software were used to calculate the elements diffusion kinet
Effect of Cutting Techniques on the Structure and Magnetic Properties of a High-grade Non-oriented E
The high grade non-oriented electrical steel sheets containing 3.0%Si were manufacturing processed using different cutting techniques, then they were stress relief annealed(SRA), the profiles and textures of the cutting edges were compared before and afte
Ion transport of sandwich cementitious materials (SCM) exposed to chloride environment was investigated by accelerated diffusion method and natural diffusion method. Pore structure and micromorphology of SCM were investigated by MIP and SEM-EDS. In compar
Ni-plated glass beads (GB) was obtained by electroless plating, based on PVC adhesive, Ni-plated GB/PVC composite was prepared. Temperature insulation, fire retardation and microwave absorption properties were tested, the results showed that the nickel co