Strong intensity variations of laser feedback interferometer caused by atmospheric turbulence

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:liunan0083
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The significant variation of the laser output can be caused by feedback of a small part of laser beam, which is reflected or backscattered by a target at a long distance from laser source, into the laser cavity. This paper describes and analyzes theoretically and experimentally the influence of atmospheric turbulence on interference caused by laser feedback. The influence depends upon both the energy of feedback into the laser cavity and the strength of turbulence over a laser propagation path in the atmosphere. In the case of stronger energy of feedback and weak turbulence variance of fluctuation of the laser output can be enhanced by hundreds to thousands times. From our measurements and theoretical analysis it shows thatthese significant enhancements can result from the change of laser-cavity-modes which can be stimulated simultaneously and from beat oscillations between a variety of frequencies of laser modes. This also can result from optical chaos inside the laser resonator because a non-separable distorted external cavity can become a prerequisite for optical chaos.
其他文献
研究了光学平面绝对检验的干涉测量方法:三面互检法。该方法需要三个被测平面,两两组合测量,就能够得到被测平面在通过其中心两个垂直方向的线轮廓数据。根据Matlab和VC混合编程思想,设计了带界面的三面互检计算软件,能够对任何一台干涉仪所采集到的实验数据进行快速计算,并进行了实验验证,得到了所测干涉仪参考平晶的绝对面形,相对于Zygo软件计算误差为3%。
期刊
Great efforts has been made on fabricating photonic crystals (PCs) with photonic band gaps (PBGs) during the past decade. Three-dimensional (3D) log pile PC was fabricated fast by direct femtosecond laser writing in ORMOCER. Qualitative analysis of the er
分析了全光纤电流互感器(AFOCT)光纤元件的双折射来源和影响,针对其应力加载特征,提出一种适用于系统的光纤双折射参数测量方法.测量基于研究双折射对偏振态的调制情况,在邦加球上分析传输光偏振态随不同光程的演化轨迹,可获得待测光纤椭圆双折射参数,相对误差在2.85%以内.验证实验说明基于测量结果的变比估计相对偏差1.08%.该方法准确度优于传统方法,装置结构简单易于实现.由传感光纤双折射测量结果可推导AFOCT系统的变比,也可作为温度、振动补偿实验的依据.本方法可作为设计制作AFOCT系统过程中的一个有力的
The continuous-time quantum walk (CTQW) is the quantum analogue of the continuous-time classical walk and is widely used in universal quantum computations. Here, taking the advantages of the waveguide arrays, we implement large-scale CTQWs on chips. We co
期刊
同时全偏振成像仪是一种基于大口径离轴三反系统的高空间分辨率偏振遥感器,它采用棱镜分振幅的同时偏振测量方法。由于仪器偏振器件多,特性复杂,导致仪器的测量矩阵偏离理想值。为保证仪器的偏振测量精度,需要进行有效的偏振定标。提出了一种利用标准线偏振光源与圆偏振光源对一种分振幅型同时偏振成像仪进行定标的方法。线偏振定标源定标仪器测量矩阵的前三列,利用最小二乘拟合傅里叶系数获得定标系数;圆偏振定标源定标仪器测量矩阵的第4列,采用将光源旋转90°测量两次求平均的方法消除光源圆偏振态的非理想性。最后通过实验验证了同时全偏
用连续波10.6 μm CO2激光辐照石英晶体基片表面,利用X射线衍射分析仪、紫外可见分光光度计、荧光光度计等对辐照前后晶体相变、透射吸收特性和表面缺陷进行了测试、分析。研究表明,经10.6 μm激光辐照后石英晶体样品表面的相结构发生了一定的转变,其吸收率降低而透射率增加,而且晶体表面缺陷得到一定的修复。石英晶体在CO2激光辐照下,经历了一个快速升温和降温的过程,较高温度及热应力作用是导致石英晶体表面微观结构及光学性能变化的主要原因。
期刊
A 10-GHz soliton source with pulse duration between 4-8 ps and wavelength continuously tunable from 1530 to 1563 nm is presented. Using regeneratively mode-locking technology, the harmonically mode-locked fiber ring laser could work without pulse dropout