发动机燃烧机油是汽车的一种常见的故障,而故障通常由活塞连杆组、配气机构、气缸体等不见密封配合不良,或机油加注过量等造成。但在修理过程中,如没有注意零件材料质量的优劣,或者维修加工工艺不规范、不标准,技术精度达不到要求,同样会引起发动机窜油的故障。 Engine combustion oil is a common failure of the car, and failure usually by the piston rod group, with gas institutions, such as the lack of seal with the cylinder block poor, or caused by excessive oil refill. However, in the repair process, such as failure to pay attention to the quality of parts and materials, or maintenance of non-standard processing technology, non-standard, technical accuracy can not meet the requirements, the same will cause the engine oil channeling fault.