论文部分内容阅读
Using de-ionized ultra-filtered water (DIUFW) as the working fluid, the effects of viscous dissipation in micro-tubes with inner diameters of 19.9μm and 44.2μm, respectively, have been studied by experiments, the theoretical analysis and the numerical simulation at laminar state. Based on thermal imaging technology of micro-area, the temperature rise resulted from the viscous dissipation in microtube is measured by employing IR camera with a specially magnifying lens at different Reynolds numbers. A 2-D model adapted to microtube is presented to simulate the viscous dissipation characteristic considering electric double layer effect (EDL). The investigation shows the calculating results are in rough agreement with the experimental data if removing the experimental uncertainties. Based on the experimental and the numerical simulation results, a viscous dissipation number which can describe the law of the viscous heating in microtube is summed up and it explains the abnormity of the flow resistance in microtubes.
Using de-ionized ultra-filtered water (DIUFW) as the working fluid, the effects of viscous dissipation in micro-tubes with inner diameters of 19.9 μm and 44.2 μm, respectively, have been studied by experiments, the theoretical analysis and the numerical simulation at laminar state. Based on thermal imaging technology of micro-area, the temperature rise induced from the viscous dissipation in microtube is measured by employing IR camera with a magnifying lens at different Reynolds numbers. A 2-D model adapted to microtube is presented to simulate the viscous dissipation characteristic considering electric double layer effect (EDL). The investigation shows the results data in removing the experimental agreement if the experimental data of the experimental uncertainties. Based on the experimental and the numerical simulation results can describe the law of the viscous heating in microtube is summed up and it explains the abnormity of the fl ow resistance in microtubes.