论文部分内容阅读
Sino-German 3D metal printing industrial base formal cooperation agreement signed
【出 处】
：
中国铸造：英文版
【发表日期】
：
2016年2期
其他文献
With the sixth large-scale railway speed-up,the quality of the axles is essential to the safety of the locomotive.According to the high-speed axle technical sta
Semisolid rheoforming(SSR)is a promising technology for the production of Mg wrought alloy in foundry settings.In order to realize SSR,it is necessary to charac
The intermetallic Ti-43Al-2Cr-2Nb（at.%） alloy was directionally solidified in an electromagnetic cold crucible with different withdrawal rates（V） ranging from 0.2 t
The compressive properties of aluminum foams by gas injection method are investigated under both quasi-static and dynamic compressive loads in this paper. The e
期刊
Abnormal mechanical property evolution induced by heat treatment for a semi-solid forming hypereutec
In the present study, Al-5.5Fe-4Cu-2Zn-0.4Mg-0.5Mn al oy samples were prepared by electromagnetic stirring and semi-solid forming processing, and then the effec
期刊
Inhomogeneity of microstructure and mechanical properties of a 500 mm diameter heavy section semi-co
For the large magnesium alloy ingot, there is a considerable difference in cooling rate of different parts in the ingot, which leads to non-uniform distribution
期刊
Using carbon isotope of soil CO2 this paper discussed the sources of soil CO2 in karst area, Guizhou Province, China. Oxidation-decomposition of organic matter,
Biodegradable Mg-xB i(x = 3, 6 and 9wt.%) alloys were fabricated by ingot casting, and the change of corrosion behavior of the alloys in the Hank’s solution wa
期刊