【摘 要】
：
Effect of stoichiometry on microstructures, electrochemical properties and PCT characteristics of the alloys Ml(Ni0.71Co0.15-Al0.06Mn0.08)x (Ml=Lanthanum-rich M
【机 构】
：
School of Materials Science and Engineering,Department of Metal Materials
论文部分内容阅读
Effect of stoichiometry on microstructures, electrochemical properties and PCT characteristics of the alloys Ml(Ni0.71Co0.15-Al0.06Mn0.08)x (Ml=Lanthanum-rich Michmetal, x=4.6～5.2) have been investigated. The lattice constants a, c, and cellvolumes of non-stoichiometric alloys are bigger than those of the stoichiometric alloy. With the increasing stoichiometry x,the value of a decreases, and the value of c and cell volume increases except for those of the stoichiometric alloy; the plateaupressure of PCT curve, discharge capacity and cycling stability all increase. The alloy with x=5.2 shows the highest dischargecapacity and the best cycling stability among the studied alloys.
其他文献
The metal matrix composite coatings of Co-Ni-Al2O3 were studied by electrolytic codeposition of Co-Ni alloys and Al2O3 on a Cu substrate from a sulfamate electr
The structure and operating principle of micro valveless pump were investigated theoretically and experimentally. The mathematical model of pressure and flow ra
Removal of inclusions from industrial pure molten aluminum(A01) by stirring active molten flux was studied. Wettability of nonmetallic inclusions in the molten
This paper establishes a mechanical model for sintered powder metal material and simulates the material behavior.Powder metal specimens were compacted, sintered
A molecular orbital approach to materials design has recently made great progress. This approach is based on the electronic structure calculations by the DV-Xα
A novel process for catalytic oxidation of methane to synthesis gas (syngas), which consists of twoconsecutive fixed-bed reactors with air introduced into the r
Using an artificial intelligent instrument and a computer feedback control method, a new thermal simulation systemis studied. Based on numerical simulation of c
Molecular dynamics simulation was carried out to study the behavior of liquid 1,2-dichloroethane molecules under external electric fields including direct curre
The technology of trailing peening is a kind of promisingly bran-new technology which can be used to control weldingstress and distortion of Ti alloy thin plate
Highly ordered multiwalled carbon nanotube arrays were fabricated by pyrolysis of acetylene within anodic alumina templates.Nanotubes are very uniform in diamet