论文部分内容阅读
为了适应电机的成批生产,我厂于1964年自行设计制作了七台电枢线圈包扎机。1983年设备更新时,又在吸取了原机的特点的基础上加以改进提高,重新设计制作了八台电枢线圈包扎机,经过三年的使用,证明已达到了预想效果。现将主要改进情况介绍如下: 一、机身的改进原机身是采用四根25×125的角钢与1毫米厚的钢板焊接而成,刚性较差,整个机床显得头重脚轻,包扎受力点高,而机座又小(见图1),工作时产生震动,影响操作及
In order to meet the motor batch production, I plant in 1964 to design a self-made seven sets of armature coil banding machine. In 1983 when the equipment was renewed, it was improved on the basis of the characteristics of the original machine. Eight armature coil wrapping machines were redesigned. After three years of use, it proved that the expected effect has been achieved. Now the main improvements are described below: First, the improvement of the fuselage The original fuselage is the use of four 25 × 125 angle and 1 mm thick steel welded together, the rigidity is poor, the machine seems top-heavy, bandage stress point high , While the base is small (see Figure 1), vibration generated during work, affecting operation and