川芎油在超临界二氧化碳中溶解度的测定与关联

来源 :中国化学工程学报(英文版) | 被引量 : 0次 | 上传用户:nicolewyy
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Extraction of the Ligusticum Chuanxiong oil with supercritical CO2 (SC-CO2) was investigated at the temperatures ranging from 55℃ to 70℃ and pressure from 25 MPa to 35 MPa. The mass of Ligusticum Chuanxiong oil extracted increased with pressure at constant temperature. The initial slope of the extraction was considered as the solubility of oil in SC-CO2. Chrastil equation was used to correlate the solubility data of Ligusticum Chuanxiong oil. An improved Chrastil equation was also presented and was employed to correlate the solubility data. The correlation results show that the values of the average absolute relative deviation are 5.94 % and 3.33%respectively, indicating the improved version has better correlation accuracy than that of Chrastil equation.
其他文献
Rectification for airborne linear images is an indispensable preprocessing step. This paper presents in detail a two-step rectification algorithm. The first ste
Using 12-hydroxystearate, nonan-edioic acid and lithium hydroxide as thickener, refined mineral oil and synthetic oil as base oil, along with some structure imp
Silicon dioxide (SiO2) films were prepared on sapphire (α-Al2O3) by radio frequency magnetron reactive sputtering in order to in crease both transmission and r
Absorption of gaseous species into stationary droplets is a fundamental interest of mass transfer between liquid droplets and ambient gas, which plays a key rol
Single-phase homogeneous Ce1- xZrxO2 solid solutions with various compositions were synthesized using the reversed microemulsion method. The structural properti
Various micro-mechanical and micro-structural influences on fatigue crack growth resistance of the material have been investigated over the years. It is widely
The reduction mechanism of stainless steelmaking dust and carbon pellets was investigated. The metal oxides present in the dust were reduced by carbon with a ne
SiCf/Ti-6Al-4V composites were fabricated by the powder-coated fiber method. The precursor fiber was prepared under the optimized parameter, and the composites
Mixture of green petroleum coke, B4C and SiC together with short carbon fiber were employed as starting materials, the mixture was press-formed without any bind
Sapphire crystals with different orientations may cone from implantation of Nb+ ions under different conditions and succedent annealing at reducing atmosphere.