论文部分内容阅读
一般工厂的维修车间,因受设备的限制,对加工长轴或光杠上的较长键槽比较困难。从我们的经验中体会到,可以在普通车床上自动拉削加工。拉削方法是:1.将手柄1放到空挡位置,使车床主轴处于自由状态下。2.将手柄2放到加大螺距位置。3.将走刀齿轮箱的丝、光杠手柄放置丝杠位置。按上述各手柄位置调好以后,即可开动机床,按下开合螺母进行拉削。图示是按C620车床绘制的各手柄位置图。
General factory maintenance workshop, due to equipment constraints, the processing of long axis or light bar on the longer key slot more difficult. From our experience, we can realize automatic broaching on ordinary lathe. Broaching method is: 1. The handle 1 into the neutral position, the lathe spindle in a free state. 2. Put the handle 2 to increase the pitch position. 3 will go through the gear box gear, light bar handle placed screw position. According to the handle position adjusted above, you can start the machine, press the opening and closing nut for broaching. The illustration shows the position of each handle drawn by C620 lathe.