【摘 要】
:
Limestone in cement could be a source of CO32-needed for thaumasite formation which will result in thaumasite form of sulfate attack (TSA) probably. TSA has more deterioration than ettringite or gypsum form of sulfate attack because it targets the calcium
【机 构】
:
College of Mechanics and Materials, Institute of Engineering Materials, Hohai University, Nanjing 21
【出 处】
:
武汉理工大学学报(材料科学版)(英文版)
论文部分内容阅读
Limestone in cement could be a source of CO32-needed for thaumasite formation which will result in thaumasite form of sulfate attack (TSA) probably. TSA has more deterioration than ettringite or gypsum form of sulfate attack because it targets the calcium silicate hydrates (C-S-H) which is the main binder phase in all Portland cement-based materials. By means of physical and mechanical property testing as well as erosion phases analysis, magnesium sulfate attack of cement-based material containing 35% limestone powder by mass at 5 ± 2℃is investigated. The compressive strength and flexural strength of mortar specimen immersed in MgSO4 solution increase firstly, then decrease rapidly with the immersing age. Relative dynamic elastic modulus of mortar specimen changes in a phased process. After immersing in MgSO4 solution for 15 weeks, the main erosion phases in paste specimen change from four phases compounds, three phases compounds to two phases compounds from surface to inside. Deterioration course of limestone cement-based material exposed to magnesium sulfate aggressive environment appears progressive damage layer by layer, and every layer probably suffers four stages, which are property strengthening stage, initial degradation stage, thaumasite formation stage and cementation loss stage, respectively.
其他文献
Four-armed amphiphilic block copolymers, polystyrene-b-poly(N-isopropylacrylamide) (PS-b-PNIPAM)4, were synthesized by atom transfer radical polymerization (ATRP). (PS-b-PNIPAM)4 self-assembled into micelles with PS block as core and thermoresponsive PNIP
Kinetics of photocatalytic degradation of methylene blue (MB) over CaTiO3 was studied. Effects of the solution pH, the MB concentration, the CaTiO3 dosage, and the type of light source on photocatalytic degradation rate of MB over CaTiO3 were investigated
A fiber optic 2-cholrophenol (2-CP) sensor was developed based on the fluorescence quenching of molecular oxygen on the oxygen-sensitive membrane and O2 consumption during catalytic oxidation reaction of 2-CP. The 2-CP concentration can be determined by u
An ultrasonic test of spot welding for stainless steel is conducted. Based on wavelet packet decomposition, the ultrasonic echo signal has been analyzed deeply in time - frequency domain, which can easily distinguish the nugget from the corona bond. The 2
Starch/polylactic acid (PLA) composites were prepared by melt extrusion, with corn starch and PLA as raw materials, glycerol as the plasticizer. Effects of starch/PLA ratio on the interdependence of two-phase and other properties of the composites were st