论文部分内容阅读
The changing law of intal forces during the whole deformation development process was analyzed.The process was divided into five stages based on the intal force state of the beam and the assumptions of intal force relationship of five stages were proposed.Then,the formulas for determining the midspan deflection of the steel beam under distributed load,which was restrained both in rotational and axial directions,were obtained using restraint coefficient method and rigid-plastic mechanism,thereby the deformation development process was expressed accurately in a quantified way.Priority was given to the analysis of the process from bending to tension-bending,then the final state totally depends on tension to resist the extal loads,that is the problem of catenary action of the restrained beam under distributed load.Additionally,finite element analysis was carried out with software ABAQUS6.7 on a restrained steel beam under distributed load with different axial and rotational restraint coefficients.The accuracy of the formulas presented was verified by the results of the behavior of the restrained beams.Finally,error analysis was conducted and some formulas were corrected according to the reasons of errors.The calculated results of corrected formulas match the FEM analysis results better,thus the accuracy of these formulas is improve(d).