填充墙的两侧大多为柱,顶面大多为梁,两侧有拉接筋起着锚固作用,在墙顶面与梁接触处,一般采用斜砌砖的做法。但内墙设计多用180毫米厚空心砖砌筑,如果用斜砌砖的做法,空心砖有孔,必须把孔预先用砂浆堵严;如果采用实心砖,可把砖打成七 Most of the sides of the infilling wall are pillars, most of which are beams on the top surface. Pulling ribs on both sides play an anchoring role. In the contact between the top surface of the wall and the beam, diagonal bricklaying is generally used. However, the interior wall design uses 180 mm thick hollow bricks. If you use diagonal bricks, the hollow bricks have holes and the holes must be blocked with mortar beforehand; if solid bricks are used, the bricks can be made into seven.