【摘 要】
：
K-promoted iron/carbon nanotubes composite (i.e.,FeK-OX) was prepared by a redox reaction between carbon nanotubes and K2FeO4 followed by thermal treatments on a purpose as the Fischer-Tropsch catalyst for the direct conversion of syngas to lower olefins.
【机 构】
：
state Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shang
论文部分内容阅读
K-promoted iron/carbon nanotubes composite (i.e.,FeK-OX) was prepared by a redox reaction between carbon nanotubes and K2FeO4 followed by thermal treatments on a purpose as the Fischer-Tropsch catalyst for the direct conversion of syngas to lower olefins.Its catalytic behaviors were compared with those of the other two Fe-IM and FeK-IM catalysts prepared by impregnation method followed by thermal treatments.The novel FeK-OX composite catalyst is found to exhibit higher hydrocarbon selectivity,lower olefins selectivity and chain growth probability as well as better stability.The catalyst structureperformance relationship has been established using multiple techniques including XRD,Raman,TEM and EDS elemental mapping.In addition,effects of additional potassium into the FeK-OX composite catalyst on the FTO performance were also investigated and discussed.Additional potassium promoters further endow the catalysts with higher yield of lower olefins.These results demonstrated that the introduction method of promoters and iron species plays a crucial role in the design and fabrication of highly active,selective and stable iron-based composite catalysts for the FTO reaction.
其他文献
The pyrolysis under inert atmosphere has been widely used for the synthesis of metal containing heteroatoms doped carbon materials,versatile catalysts for various reactions.However,it is difficult to prevent metal nanoparticles aggregation during pyrolysi
Reducing the anthropogenic CO2 emissions from fossil resource combustion and human activities has become one of the major challenges we are facing today.Beyond those practical applications for the utilization of CO2,such as the synthesis of salicylic acid
Biobutanol is attracting increasingly interest as a source of renewable energy and biofuels because of its many advantages over bioethanol that include higher energy density,fuel efficiency,and reduced engine damages.Currently,there is a growing interest
NiO nanoparticles with average particles size of 30 nm are synthesized using a one-pot metal-organic framework-combustion (MOF-C) technique,for use as an anode material in rechargeable lithium ion batteries (LIBs).The structural and electronic properties
A novel Ag3PO4-CaO composite photocatalyst with enhanced photocatalytic activity was synthesized and utilized for degradation of ammonia from aqueous solution under sunlight.Ag3PO4 was prepared by precipitation method,and the composite of Ag3PO4-CaO was p
The objective of this work is to study the influences of silica supports and PEG additive on the sorption performance of molecular basket sorbent (MBS) for CO2 capture consisting of polyethylenimine and one of the following supports:SBA-15 (2-D structure)
Polymer electrolyte membrane fuel cells (PEMFCs), as an energy conversion technology, have attracted extensive attention due to their high conversion efficiency, low emission, high energy density,and fast fuel charging [1,2].Pt-based catalysts have been a
The catalytic performance of Cs-substituted phosphomolybdic salts was studied for selective oxidation of isobutane.The results of activity tests revealed that 360 ℃ was the optimal reaction temperature.It was demonstrated that oxidizing sites not only too
Lithium metal is supposed to be critical material for constructing next-generation batteries due to extremely high capacity and ultralow redox potential.However,the perplexing issue of lithium dendrite growth impedes the commercial application.The initial