论文部分内容阅读
该马达设计采用静压支承和静力平衡等结构,具有机械特性好、效率高、维修方便等特点,达到国内同类型产品的先进水平。1.主要技术规格如下缸数:5缸径:100毫米偏心距:40毫米排量:3.14升/转额定压力:160公斤力/厘米~2最高压力:200公斤力/厘米~2额定转速:100转/分最高转速:125转/分理论输出扭矩:800公斤力·米额定输入功率:71.6千瓦容积效率:≥93％总效率:≥87％2.工作原理各油缸如图所示按径向星形排列于壳体1上。工作压力油由配流体5的主进油口接入,经配流轴6的进油腔,依次分送至各油
The motor design using hydrostatic support and static balance and other structures, with good mechanical properties, high efficiency, easy maintenance and other characteristics of the same type of products to reach the domestic advanced level. 1. The main technical specifications are as follows Cylinder number: 5 Bore diameter: 100 mm Offset: 40 mm Displacement: 3.14 l / rev Rated pressure: 160 kg / cm ~ 2 Maximum pressure: 200 kg / cm ~ 2 Rated speed: 100 Rev / min Highest speed: 125 rev / min Theoretical output torque: 800 kg power · m Rated input power: 71.6 kilowatts Volume efficiency: ≥93% Total efficiency: ≥87% 2. Working principle Each cylinder shown in the figure radial The star is arranged on the housing 1. The working pressure oil is connected with the main oil inlet of the distribution fluid 5, and then sent to each oil through the oil inlet chamber of the distribution flow shaft 6