论文部分内容阅读
我厂最近制成了一种效率高的弹簧打砖机,使耐火砖坯的成型由手工改为机械操作,工作效率提高2倍以上. 这部机器构造简单,用12×10×200厘米的木料制成高二米、宽80厘米的木架子,架子上有3根横挡、一个皮带轮,横挡中间安装打砖锤直轴,架子上端有转动轴,轴上有上下两个弧型弹簧,又带有两条鸡腿拉杆,拉杆上带有顶坯板,同时有弓形脚踩板.机器下部有打坯台,台端有脱坯眼、三角跑道.整个机器除转动轴、齿轮等部件外,大部分是用大料制成.制造一部机器,除马达外,只花150余元. 操作时很方便,由电力带动皮带轮,引动转动轴,
Our factory has recently made a high-efficiency spring brick machine, making the molding of refractory bricks from manual to mechanical operation, and the working efficiency is improved by more than 2 times. This machine is simple in construction and uses 12×10×200 cm wood. A wooden stand with a height of two meters and a width of 80 centimeters is made. There are three crosspieces and a pulley on the shelf. The straight shaft of the brick hammer is installed in the middle of the crosspiece. The upper end of the stand has a rotating shaft, and the upper and lower arc springs are on the shaft. With two chicken pull rods, with a top plate on the rod, and an arched foot plate. The lower part of the machine has hit the blank table, the end of the machine has a blank off eye, triangle runway. The whole machine except the rotating shaft, gears and other components, large Some of them are made of big materials. To make a machine, it costs only 150 yuan apart from the motor. The operation is very convenient. The pulley is driven by the power to drive the rotating shaft.