【摘 要】
：
Steam pretreatment was employed to disrupt microalgal cells for lipids extraction.Effects of steam pre-treatment on microstructure of microalgal cells were investigated through scanning electron microscopy(SEM) and transmission electron microscopy (TEM).E
【机 构】
：
Department of Life Science and Engineering,Jining University,Jining 273155,China;The Electrical Engi
论文部分内容阅读
Steam pretreatment was employed to disrupt microalgal cells for lipids extraction.Effects of steam pre-treatment on microstructure of microalgal cells were investigated through scanning electron microscopy(SEM) and transmission electron microscopy (TEM).Effect of treatment on lipid extraction was also stud-ied.Microalgal cell walls were distorted after steam pretreatment due to the hydrolysis of organic macro-molecules contained in cell wall.Maximum curvature was increased from 1.88 × 10-6 m-1 to 1.43 × 10-7 m-1 after treatment with the steam at 130 ℃.The fractal dimension of microalgal cells increased from 1.25 to 1.30 after pretreatment for 15 min,and further increased to 1.47 when the pre-treatment time was increased to 60 min.Increased steam pretreatment temperature and time enhanced the hydrolysis of organic macromolecules,and finally destroyed microalgal cell walls at pretreatment temperature of 130 ℃ and pretreatment time of 60 min.Lipid extracted from wet microalgal was signif-icantly increased (2.1-fold) after pretreatment.
其他文献
本研究针对航天器界面材料对高导热、绝缘、低迁移特性的要求,基于分子链缠结理论,自制长链烷基改性硅油(AMS)和含氟碳长链改性硅油(FPS)作为基体,以类球状氮化铝和片状氮化硼为导热填料,制得低迁移绝缘导热硅脂界面材料.通过不同粒径填料的粒径复配、发挥不同形貌填料的协同作用、填料表面改性等,导热硅脂的导热性能可达2.51 W/(m·K),其体积电阻为3.1×1015Ω·cm,击穿电压为10.1 kV·mm-1.对以自制改性硅油为基体制得的导热硅脂进行迁移性能测试,同时对基体硅油进行表面张力和接触角测试,结果
为改善Mg-Al-Si系(AS系)变形镁合金因第二相粗大、分布不均而性能较低的现状,在200℃下对挤压态Mg-4Al-1Si-1Gd合金分别进行不同时间(5 h、10 h、15 h)的等温时效和等通道挤压(ECAP)处理,并利用光学显微镜、扫描显微镜和拉伸实验分析其组织及拉伸性能.结果表明:随着等温时效时间的延长,晶粒尺寸增大,晶界处析出少量聚集的大尺寸Mg17 Al12相,时效10 h后合金的室温拉伸性能较优,但与挤压态相比强塑性明显降低.而形变时效提供的热变形能和应变累积量促进了动态再结晶的充分进行,
本工作制备了具有可调控蛋白/细胞作用且低阻抗的功能化聚3,4-乙烯二氧噻吩(PEDOT)的图案化生物界面,并在空间上引导细胞的粘附行为.功能化PEDOT共聚物由具有抗非特异性粘附的磷酸胆碱功能化的EDOT(EDOT-PC)和可进行生物耦合反应的羧基功能化的EDOT(EDOT-COOH)两种单体共聚而成.本工作研究了不同组分共聚物的电化学阻抗性能及其对蛋白、细胞的抗粘附性能,同时通过精氨酸-甘氨酸-天冬氨酸(RGD)多肽的引入实现了在抗非特异性粘附背景下对细胞的特异性粘附.在此基础上,通过光刻及电化学沉积技
采用Gleeble-3500型热模拟试验机对Al-Mg-Si-In合金进行热压缩实验,温度范围为350～500℃,应变速率范围为0.001～1 s-1,分析变形温度、变形速率对该合金热变形过程中流变应力的影响,并建立了合金的本构方程和热加工图,结合金相显微镜对热压缩变形的组织进行研究.测试结果表明:随着变形温度的降低或应变速率的加快,流变应力和峰值应力升高,合金的动态软化机制以动态回复为主,难以发生动态再结晶;合金的热压缩变形流变应力行为可用双曲正弦形式的本构方程来描述,其变形激活能为180.84 kJ/
采用静态失重、极化曲线、交流阻抗(EIS)方法测试席夫碱自组装膜在3.5％(质量分数)NaCl溶液中对铜的缓蚀作用,考察了浓度和时间两个因素.结果表明,当浓度为15 mmol/L,组装时间为14 h时,合成的缓蚀剂缓蚀性能较好,缓蚀率可达99.89％.表面形貌分析结果表明,席夫碱化合物在铜表面形成簇状物质.拉曼光谱分析结果表明,席夫碱通过咪唑环和C=N键垂直吸附于金属表面.光学接触角测量结果表明,缓蚀剂表面不易被浸润,疏水性较好.
通过脱甲基化改性提高酶解木质素酚羟基含量,以增加其环氧化反应活性,并于碱性条件下与乙二醇二缩水甘油醚(EGDE)反应合成木质素环氧接枝物(EPDL);将其作为交联剂与大豆蛋白复合制备高性能绿色大豆蛋白胶黏剂.采用核磁共振磷谱(31 P-NMR)以及红外光谱(FTIR)等分析手段对脱甲基木质素(DL)及其EPDL进行分析表征,研究了木质素脱甲基化前后羟基含量、接枝物环氧值及其化学结构的变化规律,考察了EPDL对大豆蛋白胶黏剂耐水胶合性能的影响.结果表明:脱甲基化改性明显提高了木质素羟基含量,其羟基含量较原木
The coal (syngas)-to-ethylene glycol (CTEG),is contaminated with the naughty impurity 2-Methoxyethanol (ME) generated during the hydrogenation stage,which affect the quality of EG for fiber-grade polyester production.Distillation,is the employed separatio
Carbon dots (CDs) have become popular nanomaterials in biomedical and agricultural fields.Herein we synthesized multifunctional CDs which showed anti-cancer and anti-fungal activities.The low cytotoxi-city,stable fluorescence and high photothermal convers
A series of ZSM-5@MCM-41 core-shell composite materials prepared via a multi-cycle-sol-gel coating strategy is investigated as the catalyst for benzene alkylation with ethylene,in which both ethylbenzene and para-diethylbenzene (p-DEB) are aimed as the ta
With the widespread use of lithium ion batteries in portable electronics and electric vehicles,further improvements in the performance of lithium ion battery materials and accurate prediction of battery state are of increasing interest to battery research